LEGO Harry Potter Gringotts Wizarding Bank 76417 Installation Manual
Hide thumbs
Also See for Harry Potter Gringotts Wizarding Bank 76417:
- Installation manual (13 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for LEGO Harry Potter Gringotts Wizarding Bank 76417
Summary of Contents for LEGO Harry Potter Gringotts Wizarding Bank 76417
- Page 1 Gringotts Wizarding Bank...
- Page 2 Lighting parts A to D will be used in this instruction Start from splitting the top floor from the house...
- Page 3 Assemble lighting part A starting from the ground floor Take the lighting 1x4 plate which is next to the USB plug, assemble it into the ceiling of the red room...
- Page 4 Remove some parts on the 2 floor, then take the remain lights to the 2 floor and wires could be hidden by the bricks Assemble the 1x4 lighting plate with a yellow round plate attached as the light for 2 floor...
- Page 5 Then assemble the lighting round plate to the big tan round plate and close up the model Leave the dark gray 1x4 lighting plate to assemble it at the top floor The remain lights will be moved to the big hallway, place the wire in between the studs in the red circle...
- Page 6 Assemble the last dark gray 1x4 lighting plate For the light grey 1x4 lighting plates, place them as shown and stable the wires by the dark tan 1x2 plates...
- Page 7 Then put the platform back to combine with the lighting plates The lantern will be moved to outside to replace the one without light The wires would be hidden behind the white plates on the wall...
- Page 8 Switch to the front, there’re two white 1x2 lighting plates, we will assemble the one at the end to the entrance, remove the parts as shown to make a path for the wire...
- Page 9 Restore the parts, the wire would be hidden behind the shown white pole The clear lighting round plates at the end would be assembled to the big lamp Open the cover and place the lighting round plates on the big dark tan round plate then restore the cover...
- Page 10 Leave the white 1x2 lighting plate until the top floor is restored Turn to the back of the model and take lighting part B be ready...
- Page 11 Remove the shown parts, connect the plug with lighting part A (red circle), then place the lighting 1x4 and 1x2 plate as shown (blue circle) Then restore the platforms to get the lighting plates be installed...
- Page 12 Remove the white parts on the wall, then move the lighting lantern to replace the one on the wall and restore the walls and window...
- Page 13 The remain lighting parts will be moved to the side of the house...
- Page 14 Hide the wire in between the wall and move the lights to the side door Replace the lighting yellow round bricks and place the clear lighting round plate Place the wire in between the round bricks at shown...
- Page 15 Then restore the white arch first to see does the wire fits in there If ok then you can restore the whole wall...
- Page 16 Take lighting part C to assemble to the top floor, split it as shown first...
- Page 17 Start assembling from the white 1x2 lighting plate at the end, put it as the light for balcony, it could be just passed through the window The 1x3 lighting plate and the connector will be moved to the top level, place them at the top and restore the smaller part of the roof (red circle)
- Page 18 Assemble the 1x4 lighting plate and replace the yellow round plate by the lighting round plate next to the window Then put the bigger roof back with the remain lights installed...
- Page 19 Now you can combine the house, connect the plugs and install the 1x2 lighting plate mentioned on page 10...
- Page 20 Restore the room on the roof and assemble the 1x3 lighting plate Take lighting part D to replace the orange part in the dragon’s month...
- Page 21 Hide the wire by the parts on the body, then place it on the roof and connect the plug...
- Page 22 Restore the room on the roof and assemble the 1x3 lighting plate Then put the bigger roof back with the remain lights installed...
Need help?
Do you have a question about the Harry Potter Gringotts Wizarding Bank 76417 and is the answer not in the manual?
Questions and answers