General Instructions PLEASE READ BEFORE INSTALLATION WARNING: The safety of this product can only be guaranteed if the following instructions are observed during both installation and use. Please retain these instructions safely after installation. CARE INSTRUCTION: – Wipe with a damp cloth. Make sure that the surface is kept clean and dry. This product is made of powder coated steel with anti-rust treatment Metal that has been treated with an anti-rust powder coating is suitable for outdoor use.
Assembly Process Insert the short bar at the top of the textile seat (the side where the care label is sawn) and the long bar at the bottom of the textile seat.
Page 5
Assembly Process Place the textile seat on the frame. Please make sure to flip the textile around the top.
Page 6
Assembly Process Fasten the bars with the four screws and bushing included.
Need help?
Do you have a question about the Desert and is the answer not in the manual?
Questions and answers