Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, troubleshooting, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................6 4. PRODUCT DESCRIPTION................8 5. BEFORE FIRST USE..................10 6.
• Children should be supervised to ensure that they do not play with the appliance. • Keep all packaging away from children and dispose of it appropriately. • WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use the appliance before installing it in the built-in structure. • Do not use water spray and steam to clean the appliance. •...
• If the appliance is installed above a Make sure that there is access to the drawer: mains plug after the installation. – Do not store any small pieces or • If the mains socket is loose, do not sheets of paper that could be pulled in, connect the mains plug.
2.4 Care and cleaning • Do not use aluminum foil or other materials between the cooking surface • Clean the appliance regularly to prevent and the cookware, unless otherwise the deterioration of the surface material. specified by the manufacturer of this •...
3.2 Built-in hobs CAUTION! Only use the built-in hobs after you assemble Do not connect the cable without cable the hob into correct built-in units and work end sleeve. surfaces that align to the standards. One-phase connection 3.3 Connection cable 1.
500mm 50mm Find the video tutorial "How to install your AEG Induction Hob - Worktop installation" by typing out the full name indicated in the graphic below. www.youtube.com/electrolux If the appliance is installed above a drawer, www.youtube.com/aeg...
4.2 Control panel layout Main view Symbol Description To activate and deactivate the hob. Window of the Hob²Hood infrared signal communicator. Do not cover it. Zone with Pan-frying and Boiling functions. Zone with Boiling function. A shortcut for Bridge. To merge two side cooking zones to create one cooking area or to split the merged zones.
Symbol Description Settings. To open the settings of the hob. Bridge. To connect two side cooking zones so that they operate as one. Lock. To lock / unlock the control panel. Pause. To set all cooking zones that operate to the lowest heat setting. 1 - 9 To set a heat setting.
5.1 Navigating the display To navigate between the screens, tap on the symbols on the bottom of the display. You can also swipe to the left to manage the settings for Hob²Hood or to the right to reach the Menu. 5.2 First connection to the mains 5.4 FlexPower When you connect the hob to the mains you...
6. DAILY USE 6.3 Pot detection WARNING! This feature detects if pots were placed on Refer to Safety chapters. the cooking zones and deactivates the cooking zones if the cookware is no longer 6.1 Activating and deactivating detectable. • If you put cookware on a cooking zone Touch for 1 second to activate or first and then activate the hob, a grey bar...
only for a limited time. After this time the induction cooking zone automatically sets back to the highest heat setting. 1. Select the cooking zone. 2. Touch Boost to activate the function. The function deactivates automatically. To deactivate the function manually select the zone and change its heat setting to 0.
You can change the ECO Timer settings Keep Warm mode This function keeps food warm with the low during cooking: touch with the timer temperature setting. value, then touch EDIT. Keep Warm mode is available only when the When the timer runs out, a signal sounds and cooking zone is still warm after the finished a pop-up window appears.
1. Place the cookware on the cooking 1. Touch to open the Menu. zones. 2. Select Settings > Setup > Child Lock. 2. Touch on the display to open the 3. Turn the switch on and touch the letters Menu and select Bridge. You can also E-U-O in the alphabetical order to activate the function.
Page 16
Correct pans for Pan-frying function Use only pans with flat bottoms. To check if The function is available on all cooking the pan is correct: zones. If there is any residual heat ( / 1. Put your pan upside down. ) on the cooking zone you want to 2.
Page 17
Make sure you do not pack potatoes too • The most often cooked dishes are tightly. automatically added to the list of Most • Avoid producing external vibrations (e.g. Cooked. from using a blender or placing a mobile • Some dishes have long names which phone next to the hob) when the function cannot be fully displayed on the list.
To check the current fan speed level, touch 2. Touch to turn on the light. . The fan speed level is visible in the top To turn off the light touch again. left corner of the display. To turn off the fan, 6.19 Language touch .
controls heat settings to protect the fuses of If total power of the hob is limited (1500 W - the house installation. 6000 W) the function distributes the available power between all cooking zones. Refer to • Cooking zones are grouped according to chapter "Before first use"...
Use the induction cooking zones with suitable panel or accidentally activate hob cookware. functions. • To prevent overheating and improve the performance of the zones, the cookware Refer to "Technical data". must be as thick and flat as possible. • For Pan-frying function only use pans with 7.2 Noises during operation flat bottom.
Cooker hoods with the Hob²Hood function To find the full range of cooker hoods which work with this function refer to our consumer website. The AEG cooker hoods that work with this function must have the symbol Keep the window of the Hob²Hood infrared signal communicator clean.
the hob with a moist cloth and a non- and some detergent with smooth abrasive detergent. After cleaning, wipe movement from left to right. After cleaning, the hob dry with a soft cloth. wipe the hob dry with a soft cloth from left •...
Page 23
Problem Possible cause Remedy The FlexPower level is too low. Change the maximum power in the Menu. Refer to "Before first use". The sensor fields become hot. The cookware is too large or you put Put large cookware on the rear it too near to the controls.
Make sure, you operated the hob correctly. If not the servicing by a service 10. TECHNICAL DATA 10.1 Rating plate Model KID8858AB PNC 949 598 154 00 Typ 62 D5A 01 AA 220 - 240 V / 400 V 2N, 50 Hz Induction 7.35 kW...
For optimal heat transfer and cooking results use cookware with bottom diameter similar to 11. ENERGY EFFICIENCY 11.1 Product Information according to EU Ecodesign Regulation Model identification KID8858AB Type of hob Built-In Hob Number of cooking zones Heating technology Induction Diameter of circular cooking zones (Ø)
• If it is possible, always put the lids on the • Use the residual heat to keep the food cookware. warm or to melt it. • Put the cookware directly in the centre of the cooking zone. 11.3 Product Information for power consumption and maximum time to reach applicable low power mode Power consumption in off mode 0.3 W...
Need help?
Do you have a question about the KID8858AB and is the answer not in the manual?
Questions and answers