Download Print this page

FTX FTX10220 Manual

Ramraider brushed 1/10th xl scale 4wd electric powered ready-to-run off road vehicle

Advertisement

Quick Links

FTX Ramraider Brushed 1/10th XL Scale 4WD Electric
Powered Ready-To-Run Off Road Vehicle
Congratulations on your purchase of the FTX 'Ramraider Brushed' electric off road vehicle.
This 1/10th scale model has been factory assembled and all electrics installed and set up to make it
the easiest possible introduction to the sport of driving RC cars.
WARNING: Read the ENTIRE instruction manual to become familiar with the
features of the product before operating.
Failure to operate the product correctly can result in damage
to the product, personal property and cause serious injury.
This is NOT a toy and must be operated with caution and
common sense.
Failure to operate this product in a safe and responsible
manner could result in damage,
injury or damage to other property.
This product is not intended for use by children without
direct adult supervision. It is essential to read and follow
all the instructions and warnings in the manual, prior to
assembly, set-up or use, in order to operate correctly and avoid
damage or serious injury.
Safety Precautions and Warnings
You are responsible for operating this model such that it does not endanger
yourself and others, or result in damage to the product or the property of others.
This model is controlled by a radio which is possibly subject to interference which can cause momentary loss of control so it is advisable to
always keep a safe distance to avoid collisions or injury.
Age Recommendation: 14 years or over. This is not a toy. This product is not intended for use by children without direct adult supervision.
Carefully follow these directions and warnings, plus those of any additional equipment associated with the
use of this model, chargers, ESC and motors, radio etc.
Never operate your model with low transmitter batteries.
Always operate your model in an open area away from cars, traffic or people.
Never operate the model in the street or in populated areas.
Always keep the vehicle in direct line of sight, you cannot control what you cannot see!
Keep all chemicals, small parts and anything electrical out of the reach of children.
Although splash-proof the car and electronics are not designed to be subjected to extended moisture exposure or submersion.
To do so will result in permanent damage.
Avoid injury from high speed rotating parts, gears and axles etc.
Novices should seek advice from more experienced people to operate the model correctly and meet its performance potential.
Exercise caution when using tools and sharp instruments.
Do not put fingers or any objects inside rotating and moving parts.
Take care when carrying out repairs or maintenance as some parts may be sharp.
Do NOT touch equipment such as the motor, electronic speed control and battery, immediately after using your model because they can generate high temperatures.
Always turn on your transmitter before you turn on the receiver in the car. Always turn off the receiver before turning your transmitter off.
Keep the wheels of the model off the ground, and keep your hands away from the wheels when checking the operation of the radio equipment.
Prolong motor life by preventing overheat conditions.
Undue motor wear can result from frequent turns, rapid change
of direction forwards/backwards, continuous stop/starts,
pushing/pulling objects, driving in deep sand and tall grass,
or driving continuously up hill.
Contents:
FTX Ramraider Brushed Car
Transmitter: 2.4ghz Steerwheel
Charger: 2S/3S 800mA Balance Charger
Battery: 2500 7.4V 2S LiPo
FTXRamraiderBR Manual.indd 2
Pictured with optional wheelie bar - FTX10220
2
05/04/2024 17:01

Advertisement

loading
Need help?

Need help?

Do you have a question about the FTX10220 and is the answer not in the manual?

Questions and answers

Summary of Contents for FTX FTX10220

  • Page 1 FTX Ramraider Brushed 1/10th XL Scale 4WD Electric Powered Ready-To-Run Off Road Vehicle Congratulations on your purchase of the FTX ‘Ramraider Brushed’ electric off road vehicle. This 1/10th scale model has been factory assembled and all electrics installed and set up to make it the easiest possible introduction to the sport of driving RC cars.
  • Page 2: Required Equipment For Operation

    REQUIRED EQUIPMENT FOR OPERATION 4 pcs AA Alkaline Batteries FTXRamraiderBR Manual.indd 3 05/04/2024 17:01...
  • Page 3: Handling Instructions

    CHARGING/INSTALLING THE BATTERY IMPORTANT! ALWAYS CHARGE IN A LIPO SACK LIPO BATTERY - USER SAFETY AND OR TIN AWAY FROM FLAMMABLE MATERIALS HANDLING INSTRUCTIONS. (SUCH AS CARPET). ALWAYS MONITOR CHARGE • Read all safety instructions before charging or using your batteries for the STATUS INCASE YOU NEED TO STOP WITH first time.
  • Page 4: Specification

    HOBBYWING BRUSHLESS SYSTEM SET-UP INSTRUCTIONS oof Brushed Speed Controller (RTR Version) HW-SM690ENG-V3-2 ng our electronic speed controller(ESC). The power system for RC model can be very The control ca ead this manual carefully. In that we have no control over the correct use, installation, wires with blac ESC Operation SPEED CONTROL CONNECTION DIAGRAM...
  • Page 5: Troubleshooting

    Table B: LVC protection for WP-1625-BRUSHED-Crawler, THE DIFFERENCE BETWEEN “BRUSHED” AND “BRUSHED-CRAWLER WP-1040-BRUSHED-Crawler&Boat, WP-860-DUAL BRUSHED & BOAT” ESC (Crawler or Boat mode). 1. “Brushed” and “Brushed-Crawler& Boat” ESCs have different backward-running modes. 2S Lipo 3S Lipo 4S Lipo 5-9 cells NiMH “Brushed”...
  • Page 6 GETTING TO KNOW YOUR TRANSMITTER EX4GT Transmitter Specifications EX4GT Receiver Specifications EX4GT Transmitter Function FTXRamraiderBR Manual.indd 7 05/04/2024 17:01...
  • Page 7 FTXRamraiderBR Manual.indd 8 05/04/2024 17:01...
  • Page 8 RUNNING YOUR CAR TURNING ON THE RECEIVER OF YOUR CAR TURN ON THE RADIO CONTROLLER Switch on the power The ESC Receiver switch on the radio switch is located controller. under the Your radio is bound bodyshell of the with your car model.
  • Page 9 RUNNING YOUR CAR TUNING THE STEERING TRIM STEERING TRIM KNOB: The ST-TRIM knob is used to adjust the trim of the steering so that the wheel are centered and the vehicle tracks straight. When you adjust the ST-TRIM, the LED will display the ST-TRIM value. After the adjustment is completed for 5 seconds, the LED will return to indicate the battery level.
  • Page 10 Many electrical items that we throw away can Due to the nature of this product and potential use FTX warrants it to be free be repaired or recycled. Recycling items helps to save natural resources and of material and workmanship defects when new.