SainSmart 101-93W-CWT-B2 User Manual
  1. Manuals
  2. Brands
  3. SainSmart Manuals
  4. Trimmer
  5. 101-93W-CWT-B2
  6. User manual
SainSmart 101-93W-CWT-B2 User Manual

SainSmart 101-93W-CWT-B2 User Manual

Cordless wood trimmer
Hide thumbs

Advertisement

Table of Contents

Cordless Wood Trimmer
USER MANUAL
V 1.0
Please read carefully before use. Please keep it for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 101-93W-CWT-B2 and is the answer not in the manual?

Questions and answers

Summary of Contents for SainSmart 101-93W-CWT-B2

  • Page 1 Cordless Wood Trimmer USER MANUAL V 1.0 Please read carefully before use. Please keep it for future reference.

  • Page 2: Safety Warnings

    FOREWORD Thank you for choosing the SainSmart Cordless Wood Trimmer. Please read this user manual thoroughly before use. Any questions and concerns, please simply drop a message to the SainSmart support team <support@sainsmart.com>.Most issues can be resolved quickly. SAFETY WARNINGS Cordless trimmer safety warnings 1.
  • Page 3 17. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data. 18. Always use the correct dust mask/respirator for the material and application you are working with. SAVE THESE INSTRUCTIONS. WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product.
  • Page 4 CAUTION: Recommended to use original battery. Use batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the SainSmart warranty for the tool and charger. Tips for maintaining maximum battery life 1.

  • Page 5: Installing Or Removing Battery Cartridge

    OVERVIEW CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. INSTALLING OR REMOVING BATTERY CARTRIDGE CAUTION: Always switch off the tool before installing or removing of the battery cartridge.
  • Page 6 INDICATING THE REMAINING BATTERY CAPACITY Only for battery cartridges with the indicator Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light up for few seconds. NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity.
  • Page 7 SWITCH ACTION To start the tool, press the power button in the standby mode. To stop the tool, press the power button again. The tool turns into the standby mode. LIGHTING UP THE LAMP CAUTION: Do not look in the light or see the source of light directly. To turn on the lamp, press the power button.

  • Page 8: Electronic Function

    1. Speed adjusting button Number of LED Speed 12,000 RPM 16,000 RPM 20,000 RPM 24,000 RPM 28,000 RPM NOTE: If the tool is operated continuously at low speed for a long time, the motor will get overloaded, resulting in tool malfunction. ELECTRONIC FUNCTION The tool is equipped with the electronic functions for easy operation.

  • Page 9: Specifications

    1. Hex nut SPECIFICATIONS Collet Chuck Capacity 1/4" (6.35mm) Noload Speed 12,000 - 28,000 RPM Rated voltage DC 18-21V Adjustable Height Stroke 0-22mm BL1815N / BL1820B / BL1830 / BL1830B / Compatible Batteries BL1840B / BL1850B / BL1860B Packaging Accessories...
  • Page 10 ASSEMBLY INSTALLING OR REMOVING TRIMMER BIT CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. NOTE: Do not tighten the collet nut without inserting the bit. The collet cone may break. Insert the trimmer bit all the way into the collet cone.
  • Page 11 NOTE: The shaft lock may not return to the original position when you tighten the collet nut at the installation of the trimmer bit. The shaft lock returns to the original position when you start the tool. 1. Shaft lock INSTALLING OR REMOVING THE TRIMMER BASE 1.
  • Page 12 2. Close the lock lever. 3. Attach the dust nozzle to the trimmer base, and then tighten the thumb screw. 1. Dust nozzle 2. Thumb screw To remove the base, follow the installation procedure in reverse.

  • Page 13: Operation

    OPERATION USING THE TOOL WITH THE TRIMMER BASE Set the tool base on the workpiece without the trimmer bit making any contact. Turn the tool on and wait until the bit attains full speed. Move the tool forward over the workpiece surface. Keep the tool base flush while moving the tool.
  • Page 14 USING THE STRAIGHT GUIDE Optional accessory 1. Assemble the straight guide with the bolt and the wing nut. 1. Bolt 2. Wing nut 2. Attach the straight guide to the trimmer base with the clamp screw. 1. Clamp screw 3. Loosen the wing nut on the straight guide and adjust the distance between the bit and the straight guide.
  • Page 15 4. Move the tool with the straight guide flush with the side of the workpiece. If the distance (A) between the side of the workpiece and the cutting position is too wide for the straight guide, or if the side of the workpiece is not straight, the straight guide cannot be used.
  • Page 16 USING THE STRAIGHT GUIDE FOR CIRCULAR For circular work, assemble the straight guide as shown in the figures. The minimum and maximum radius of circles to be cut (distance between the center of circle and the center of bit) are as follows: •...
  • Page 17 1. Nail 2. Center hole USING THE TEMPLET GUIDE Optional accessory The templet guide allows for repetitive cut with templet patterns by using a templet. 1. Loosen the screws on the base plate, and then remove the base plate from the trimmer base. 2.
  • Page 18 3. Place the tool on the templet and move the tool with the templet guide sliding along the side of the templet. NOTE: The actual cut size on the workpiece is slightly different from the templet. The difference is the distance (X) between the trimmer bit and the outside of the templet guide.
  • Page 19 USING THE TRIMMER GUIDE Optional accessory The trimmer guide allows for trimming curved side like veneers for furniture by moving the guide roller along the side of the workpiece. 1. Loosen the clamp screw, then install the trimmer guide on the trimmer base, and then tighten the clamp screw.

  • Page 20: Maintenance

    NOTICE: Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. WARRANTY SainSmart provide a 1-year warranty and provide lifetime technical support. For any questions or suggestions，please email the SainSmart team at: support@sainsmart.com or visit the support page of www.sainsmart.com...
  • Page 21 If you need any assistance, please contact us via: Email: support@sainsmart.com Facebook messenger: https://m.me/SainSmart www.sainsmart.com 2330 Paseo Del Prado, C303, Las Vegas, NV 89102 # PowerToTheMakers...

Table of Contents