Related Manuals for Marshall Amplification MS-OS500
Summary of Contents for Marshall Amplification MS-OS500
- Page 1 Orbital and Linear Shaker MS-OS500/MS-OS800 MS-LS3502.5/MS-LS3507.5 User Manual MARSHALL...
-
Page 2: Table Of Contents
Content 1. Safety Instructions ..........................2 1.1 Safety Instructions ........................2 1.2 Proper Use ..........................2 1.3 Inspection ..........................3 1.3.1 Receiving Inspection ....................... 3 1.3.2 Listing of Items ....................... 3 2. User Instructions ..........................4 2.1 Trial running ..........................4 2.2 Control and Set ......................... -
Page 3: Safety Instructions
1. Safety Instructions 1.1 Safety Instructions Warning！ • Read the operating instructions carefully before use. • Ensure that only trained staff works with the instrument. Protective ground contact! • Make sure that the electrical socket is grounded (protective ground contact) before use. -
Page 4: Inspection
1.1. 1.3 Inspection 1.3.1 Receiving Inspection Unpack the instrument carefully and check for any damages which may have arisen during transport. If it happens, please contact supplier for technical support. Note: If there is any apparent damage to the unit, please do not plug it into the power line. -
Page 5: User Instructions
To do this, turn the appropriate foot downward with the wrench until the instrument is standing securely on the surface. (Refer to Picture 1) Picture 1 2.2 Control and Set 2.2.1 Technical Parameters MS-OS500 MS-OS800 Model MS-LS3507.5 MS-LS3502.5 Shaking Motion... -
Page 6: Control
100-500 (Orbital) 100-800 (Orbital) Speed Range (rpm) 100-350 (Linear) 100-350 (Linear) Speed Display Time Range 1-1199min Operation Mode Continuous/timed operation Ambient Temp. 5-40℃ Protection Type IP21 Connection Interface RS232 Power Consumption Power supply AC110/220V±10%, 50/60Hz 1pc SK180.1 universal Standard Accessory 1pc SK330.1 universal attachment attachment External Size (W*D*H) 370*420*100mm... -
Page 7: Set
Display the status of instrument and any set Main switch Switch ON or OFF. • Put the instrument on stable and safe place and plug in the mains power. • Turn ON the mains switch on the left panel. • The instrument starts self-test. -
Page 8: Operating Modes
2.3 Operating modes 2.3.1 Mode A Operating mode A is the default mode set in factory. After turning ON the instrument with the mains switch, the shaking and timing functions are turned OFF. The LCD displays the set time and speed values. -
Page 9: Switching The Mode
(1) The left LCD displays “SAF” and the right displays the upper speed limit( rpm） which cannot be changed. Picture 7 (2) The LCD displays run modes “StA” for about 2 seconds. Picture 8 (3) The set speed value is shown in the left display, and the set time value is shown in the right display. -
Page 10: Trouble Shooting And Maintenance
3. Trouble shooting and Maintenance 3.1 Faults (1) When switched ON, the instrument doesn’t work • Check whether the power cable fitted well • Check whether the fuse is broken (2) The speed cannot reach set value • Check whether it is overloaded (3) The motor does not start via pressing the speed knob and time knob •... - Page 11 Note: a. Electrical instrument may not be placed in the cleansing agent for the purpose of cleaning. b. The instrument must be cleaned and put it into the initial packaging carton before sending to service for repair, avoiding the contamination of hazardous. c.
-
Page 12: Warranty
4. Warranty 1) Warranty is 12 months from EX-factory date (excluding consumable accessories). 2) We will take no responsibility for risks caused by improper operation and man-made damages. 3) After the expiration of warranty, our company is also responsible for repairs, but the corresponding maintenance cost should be charged. - Page 13 Marshall Scientific 102 Tide Mill Road, Units 1-5 Hampton, NH 03842 USA (603) 601-8511 new.marshallscientific.com...
Need help?
Do you have a question about the MS-OS500 and is the answer not in the manual?
Questions and answers