Table of contents Getting started Product version information The kit contents Precautions for safe use and optimal DitoGear™ Trito performance Motor warning signals and behaviors Getting to know the Trito Setting up the Trito Calibration Using Mirror mode Conservation guidelines ...
DitoGear™ Trito Please DitoGear™ Trito performance Thank You very much for purchasing DitoGear™ motion ensure to carefully read the safety instructions and The DitoGear™ OmniSlider Servo, OmniHead and control equipment.
3 motion axes with an independent control over max speed, speed damping and calibration of the travel range for The Trito is powered via RJ45 type signal cables from 3 status LEDs, one for each of axes each of axes DitoGear™...
Proceed with calibration for each of axes separately the LEDs are not illuminated Move joystick to maximum cables to DitoGear™ Trito and to Input 1 & 2 port of the device to the desired IN-point (either “left” or “right”) then...
Caution! DitoGear is not responsible for any damage or failures caused by the use of a 3rd party power supply adapter. For consumers, who are covered by consumer protection laws or regulations in their country of purchase or, if different, 8 Precautions for Safe Use of DitoGear™...
DitoGear’s property Parts provided by DitoGear in fulfillment of its warranty obligation must by anyone who is not a representative of DitoGear; (g) to a product or part that has been modified to alter functionality or be used in products for which warranty service is claimed When a refund is given, the product for which the refund is capability without the written permission of DitoGear;...
The device and all batteries included with it must be disposed of properly according to local laws and regulations The product must be disposed of separately from the household waste When your product reaches its end of life, contact DitoGear or your...
Need help?
Do you have a question about the TRITO and is the answer not in the manual?
Questions and answers