Visioneer OneTouch 9750 User Manual page 46

To make sure all of your computer's Destination Applications are linked
to OneTouch 4.0, click the Refresh button.
Important: Later on, if you install new software that can be used as a
Destination Application, click the Refresh button again to link the
new software to OneTouch 4.0. Note that some software installed on
your computer may be incompatible with OneTouch 4.0.
Incompatible software will not be listed as a Destination Application.
Select Configuration—The list of available scan configurations for the
selected button. The configuration's basic settings include: scanning
mode, resolution (dpi), page size, brightness (Br), and contrast (Cr). To
see a selected scan configuration's settings, click its icon. Click the icon
again to close the detailed information.
Click the icon of a selected
configuration to view its
settings.
These icons next to each scan configuration indicate the scanning
mode:
Color Black and White
Note: Use Configure Before Scan if you want to set the scanning
mode manually before scanning. See "Configuring Before Scanning"
on page 73.
You can also click the Edit button or double click the configuration to
see more detailed information about the selected configuration.
C O T
ONFIGURING THE NE
Grayscale
Configure
Before Scan
B 39
OUCH UTTONS