Chapter 2 Bios Setup Utility; When To Use Bios Setup; How To Run Bios Setup; Control Keys - ViewSonic VNB131 User Manual

Chapter 2 BIOS Setup Utility

2.1 When to Use BIOS Setup?

You may need to run the BIOS Setup when:
An error message appears on the screen during the system boot and you are requested
to run SETUP.
You want to change the default settings for customized features.
You want to reload the default BIOS settings.

2.2 How to Run BIOS Setup?

To run the BIOS Setup Utility, turn on your ViewBook Pro and press the <F2> key
during the POST procedure.
If the message disappears before you respond and you still wish to enter Setup,
either restart the system by turning it OFF and ON, or try to restart by simultaneously
pressing <Ctrl>+<Alt>+<Delete> keys.
Be noted that the screen snaps and setting options in this chapter are for your references only.
The actual setting screens and options on your ViewBook Pro may be different because of
BIOS updates.

2.3 Control Keys

Press F1 to call a small help window that describes the appropriate keys to use and the
possible selections for a highlighted item.
Please check the following table for the function description of each control key.
Control Key(s)
← / →
↑ / ↓
+/ -
<Enter>
<ESC>
<F1>
<F9>
<F10>
<PGDN>
<HOME>
<PGUP>
<END>
ViewSonic VNB131
Moves cursor left or right to select Screens
Moves cursor up or down to select items
Changes an option for the selected items
Brings up the selected screen
When in the Main Menu - Quits and not saves the changes your have made
into CMOS
When in the Status Page Setup Menu or the Option Page Setup Menu – Exits
the current page and returns to the Main Menu
Calls the general help
Loads the Optimal Default settings
Saves the configuration changes and exits setup
Goes to a next page
Goes to the top of the screen
Goes to the previous page
Goes to the bottom of the screen
Function Description
17