Rear View Of The Product - ViewSonic VT2405LED User Manual

Getting Started Getting Started

Rear View of the Product

Item
1 Power (AC input)
RS232 signal input
2
HDMI 1 Input Terminal
3
4 SPDIF Optical output
USB
5
HDMI 2 Input Terminal
6
7 S-Video input
Composite Video input
8
AV/ S-Video Audio
9
input (left/ right)
YPbPr signal Audio
10
input (left/ right)
11 YPbPr signal input
12 PC Audio input
13 VGA signal input
ViewSonic
Description
Plug-in the supplied AC Power cord and connect to the AC input
power source.
This port is for the service technician's use.
Connect this port to the HDMI output of PC device.
Connect this port to the SPDIF input of A/V device.
Connect to your USB devices, such as USB fl ash drive.
Connect this port to the HDMI output of A/V device.
Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
Connect this jack to the composite video output connectors on your
A/V equipment.
Connect the Audio in cable for AV/ S-Video from this jack to the
corresponding connectors on your A/V device.
Connect the Audio in cable for YPbPr from this jack to the
corresponding connectors on your A/V device.
Connect this port to the YPbPr output of A/V device.
Connect the RGB Audio Out on your computer to the RGB Audio
on the rear of the LCD TV.
Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the RGB input on the rear of the LCD
TV.
6
VT2405LED