Advertisement
Quick Links
1. Power On
2. Place Gently in Pool
Place the robot into the pool with the bottom towards the wall
Submerge the robot into water for 20 seconds to empty trapped air
3. Lift Out of Pool
CLEAN
QUICK GUIDE
Press the button: blue light indicates
the robot is powered on
Press the button again: red light
indicates the robot is powered off
ROBOT IS POWERED ON
ROBOT IS POWERED OFF
The robot will move to
the pool edge when it
finishes working
Use the provided hook to
lift it out of the pool
Advertisement
Summary of Contents for Autopilot AQUACLEAN
- Page 1 CLEAN QUICK GUIDE 1. Power On Press the button: blue light indicates the robot is powered on Press the button again: red light indicates the robot is powered off ROBOT IS POWERED ON ROBOT IS POWERED OFF 2. Place Gently in Pool Place the robot into the pool with the bottom towards the wall Submerge the robot into water for 20 seconds to empty trapped air 3.
- Page 2 CLEAN QUICK GUIDE 4. Clean After Use Take out the fi lter basket from the top cover and rinse it with water Make sure the fi lter basket is clean after each use 5. Charge the Robot Make sure the charger and charging port are clean and dry before charging CHARGING...
Need help?
Do you have a question about the AQUACLEAN and is the answer not in the manual?
Questions and answers