Using The Viewpanel; Setting The Timing Mode - ViewSonic ViewPanel VA800 User Manual

Using the ViewPanel

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The timing mode consists of the resolution
(example 1280 x 1024) and refresh rate (or vertical frequency--example 60
Hz). After setting the timing mode, use the OnView
page 10) to adjust the screen image.
The recommended timing mode for this ViewPanel is:
®
VESA 1280 x 1024 @ 60 Hz
To set the Timing Mode:
Set the resolution: Right-click on the Windows
1
Settings > Desktop Area (Screen Area for Windows 95 and newer) > set
the resolution.
Set the refresh rate: See your graphic card's user guide for instructions.
2
Do not set the graphics card in your computer to exceed the
WARNING:
maximum refresh rate of 75 Hz. Doing so may result in permanent damage to
your ViewPanel.
controls (beginning on
®
desktop > Properties >
®
ViewSonic VA800
E
N
G
L
I
S
H
7