LANSEN LAN-WMBUS-C4-M-IP-A1 Quick Installation Manual

Mains concentrator with optional use for external antenna

Advertisement

Quick Links

Q U I C K I N S T A L L A T I O N G U I D E
MAINS CONCENTRATOR WITH OPTIONAL USE FOR EXTERNAL
ANTENNA
LAN-WMBUS-C4-M-IP-A1
LAN-WMBUS-C4-M-IP-A1-X
Version 1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LAN-WMBUS-C4-M-IP-A1 and is the answer not in the manual?

Questions and answers

Summary of Contents for LANSEN LAN-WMBUS-C4-M-IP-A1

  • Page 1 Q U I C K I N S T A L L A T I O N G U I D E MAINS CONCENTRATOR WITH OPTIONAL USE FOR EXTERNAL ANTENNA LAN-WMBUS-C4-M-IP-A1 LAN-WMBUS-C4-M-IP-A1-X Version 1.0...
  • Page 2 Lansen Systems AB. Furthermore, a 230 VAC installation MUST be carried out by Lansen Systems AB is not responsible for any errors or omissions an authorized installer (skilled person) according to the in this manual. The information provided is believed to be accurate relevant electrical safety regulations.
  • Page 3: Additional Information

    UDP or TCP format. To the M-Bus telegram, extra information is added such as RSSI, duration (age of message) and error information. www.lansen.io/assortment/accessories/ For more information, go to our website at www.lansen.io. LABEL INFORMATION Items included: The label on the device gives useful information about your device, see example below.
  • Page 4: Specifications

    SPECIFICATIONS First Install wM-Bus Opening the housing Frequency M: 868,000 MHz to Unscrew the screw (red circle) and remove the cover by band(s) 868,600 MHz pushing the clips (green circles) on both sides of the cover. N: 868,700 MHz to 869,200 MHz Note: The screw is a Security Torx T20H (with a small pin Ethernet 100Mbit...
  • Page 5: Installing The Power Supply Cable

    Stripping power supply cables Using the bottom cable inlet Prevent chafing damage to your cable by carefully Risk of fire. Strip the power supply cables according cutting, drilling or punching out the hole marked in to the diagram to avoid cable clamps attaching to the picture below.
  • Page 6: Attaching The Ethernet Cable

    If you are using the -X version, attach the antenna. Turn on the device to make sure everything is working as intended. Finalize by mounting the device, using the preparations made in Preparation for mounting. Please note that we do not supply screws. Configuration , found on our website. www.lansen.io/assortment/infrastructure/converters/...
  • Page 7: Close The Housing

    Note: The screw is a Security Torx T20H (with a small pin in the middle). SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Lansen Systems AB declares that the radio equipment type defined by article name on the sticker is in compliance with Directive 2014/53/EU. The full text of the...

This manual is also suitable for:

Lan-wmbus-c4-m-ip-a1-x

Table of Contents