Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Powerplus WHISPR-7
- Page 1 WHISPR-7 QUICK-START INSTALLATION GUIDE...
-
Page 2: Safety Statement
Failure to comply with any of the above requirements may result in injury to personnel or damage to equipment. PowerPlus Energy shall not be liable for any loss of life or damage caused by failure to comply with the requirements of this document and user manual. -
Page 3: Packing List
Packing List RX- 7013Plus Standard Accessories Base Components Side cover(right) Side cover(left) RX-7013Plus 1PCS 1PCS 1PCS 1PCS PCS bracket A PCS bracket B Base bracket Battery Connecting buckle 1PCS 1PCS 2PCS 2PCS PV output connector PV input connector RJ45 waterproof plug 3PCS 3PCS 4PCS... -
Page 4: Installation Location
Dimension 210mm 210mm 750mm 1540mm Installation Location No direct sunlight No rain exposure No snow exposure Direct sunlight Rain exposure Snow exposure... -
Page 5: Pre-Operation Inspection
Pre - Operation Inspection Result Checking Items ① The installation location meets the manual & standard's requirements. The system has been securely installed. ② ③ Sufficient space for heat dissipation. No objects are left in or on the system. ④ System wiring is connected and tightened. -
Page 6: Installation
Installation Avoid water and electricity when drilling, bit size φ8mm, drilling depth 40mm. Expansion 2.8 N.M Bolts 5 N.M Expansion Bolts 5 N.M Refer to the electrical connection section for wiring... -
Page 7: Port Instruction
Port Instruction Items Name GRID BACKUP DRMO / METER PARALLEL ON-OFF PV SW GRID BREAKER BACKUP BREAKER WIFI BAT BREAKER PE Wiring 2.8 N.M PE Cable 3 PE Cable 2 PE Cable 3... - Page 8 PV Connection Positive metal terminal Positive connector PV-CZM-22100/19100 Ensure that the cable Negative connector Negative metal terminal cannot be removed Measuring voltage Use the open spanner to tighten the lock nut. If the spanner slips during tightening, it indicates that the lock nut is PV-MS-HZ tightened open spanner...
-
Page 9: Grid Connection
Tighten connector on the thread once Dongle is in. Grid Connection Grid Connector Click... - Page 10 Load / Generator Connector Tighten the screw once connector is in. DRMO / METER, DRY, PARALLEL...
-
Page 11: Dry Contact
The dry contact is connected based on customer requirements Dry Contact Connect with weak current Group Definition DRY_1_NC 1 2 3 4 5 6 7 8 DRY_1_COM RJ45 DRY_1_NO CT / Smart meter / DRM0 Smart meter 485,DRM0 signal, external CT Group Definition I_CT_IN-... - Page 12 Network cable (8pin) The parallel ports are RJ45 terminals and are connected using conventional 8 pin network cables CT / Meter Installation RX-7013Plus L - Line GRID Backup Loads Inverter The CT with the "GRID" label is attached to Grid the L line of the power grid.
-
Page 13: Led Indicator
LED Indicator Display Logic LED2 LED3 Bi-colour LED1 System Status System Information Grid/Gen Battery LED4(Green/RED) Wifi/Ethernet/Fault ▲ ▲ ▲ ▲ Power on ■ ■ ■ ■ Power off Normal Information Promote update Promote update success ★ ★ ★ ★ ■ ■... - Page 14 SOC Led lndicate Charging ● ● ● ● ● flash 0-20% 21-40% flash 41-80% flash flash 61-80% 81-100% flash Normal ● ● ● ● ● 0-20% 21-40% 41-80% 61-80% 81-100% Notice If the startup fails, refer to "Troubleshooting" in the user manual. For details about LED indicators, refer to the user manual.
- Page 15 Description Of Energy Storage Capacity Inverter*1 13kWh Battery*4 RX7013Plus Base*1...
- Page 16 All Downloads Warranty Registration App Download The size and parameters of the product are subject to change without notice. Rev 16.05.2024.
- Page 17 Helping power possibilities. One system at a time. In Technical Partnership with Redx PowerPlus Energy Pty Ltd 2 Koornang Road Scoresby, Vic, 3179 Australia +61 3 8797 5557 info@powerplus-energy.com.au powerplus-energy.com.au...
Need help?
Do you have a question about the WHISPR-7 and is the answer not in the manual?
Questions and answers