Advertisement
Quick Links
A
SIGE Infinity Pullout
Bottle Rack - Large Capacity
INSTALLATION INSTRUCTIONS
Y
MIN.
DEPTH
G
E
14 x 4x16
Self-tapping Screws
4 x 6.3x12 Eurovite Screws
8 x 3.9x13 Self-tapping Screws
2 x M6x10 Screws
2 x
Washers
A. 1 x Basket
C. 1 x Slides Set
D. 2 x Door Brackets
E. 1 x Carter Slides Kit
F. 1 x Spacer Kit for 18/20mm Cabinet Thickness
G. 1 x Spacer Kit for 16/19mm Cabinet Thickness
SLIDES
SLIDES
VERSION D.450
VERSION D.500
445
495
F
C
D
Advertisement
Summary of Contents for Enko SIGE Infinity
- Page 1 SIGE Infinity Pullout Bottle Rack - Large Capacity INSTALLATION INSTRUCTIONS 14 x 4x16 Self-tapping Screws 4 x 6.3x12 Eurovite Screws 8 x 3.9x13 Self-tapping Screws 2 x M6x10 Screws Washers A. 1 x Basket C. 1 x Slides Set D. 2 x Door Brackets E.
- Page 2 8 x 4x16 Place slides C respecting showed data and screw them on the cabinet’s sides. NB: It’s possible to choose slides position either on top or on the bottom to suit your needs. P.GUIDA DEPHT SLIDES 8 x 3.9x13 Screw D brackets on the door respecting showed data.
- Page 3 4 x 6.3x12 Screw the carter E onto the shelf using the 6.3x12 eurovites. NB: Place the carters E on the shelves according to how the guides C were previously placed (see step 1). Fit basket on slides C. CLICK! 2 x M6x10 Pre-assemble the two M6x10 screws and washers as shown in fig.
- Page 4 Loosen the four screws M6x10 “L”, turn the screw “M” as shown to adjust the Loosen the four screws M6x10, to adjust the door forward and back. door up and down. Loosen the 3.9x13 screws, to adjust the door to the right and left. Insert bottle dividers.
Need help?
Do you have a question about the SIGE Infinity and is the answer not in the manual?
Questions and answers