Chapter 2 2.1 screw holes Put screws into the holes to secure the motherboard to the chassis . And Put screws into the hole to secure the bottom panel to the chassis .
2.1 Pre-installation precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component . 2. To avoid damaging the motherboard components due to static electricity, Never place your motherboard directly on the carpet or the like .
Page 8
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the FW6A-0 and is the answer not in the manual?
Questions and answers