Oxygenics PawSpa SuperWashPro Quick Start Manual

SHOWER
QUICK START GUIDE
STEP 1
Remove your existing
shower head. To remove,
turn the existing shower
head in a counterclockwise
direction.
STEP 2
Attach end of hose to
shower arm and hand
tighten.
STEP 3
Attach SuperWashPro to
other end of hose and
hand tighten. Enjoy!
For use with automatic compensating valves rated at 1.35 GPM (5.11 L/min) or less.
QUICK START GUIDE
FOR MALE THREADED FAUCETS:
STEP 1
Remove smaller end of sink adapter by turning
in a counterclockwise direction. Remove faucet
aerator and hand tighten larger end of sink
adapter in a clockwise direction until firmly
attached to the faucet neck.
STEP 2
Attach hose to sink adapter.
Attach SuperWashPro to hose.
Hand tighten only. Enjoy!
FOR FEMALE THREADED FAUCETS:
STEP 1
Remove faucet aerator and
hand tighten sink adapter in a
clockwise direction until firmly
Male
15/16 in.
attached to the faucet neck.
STEP 2
Attach hose to sink adapter.
Attach SuperWashPro to hose.
Hand tighten only. Enjoy!
Sink adapter fits two common sizes of faucets after removing aerator:
Female 55/64 in. (22mm) and Male 15/16 in. (24mm).
SINK
QUICK START GUIDE
STEP 1
Female
55/64 in.
In a clockwise direction,
hand tighten outdoor spigot
adapter to spigot or garden
hose until firmly attached.
STEP 3
Attach SuperWashPro to
hose. Enjoy!
For use with automatic compensating valves rated at 1.35 GPM (5.11 L/min) or less.
SPIGOT
STEP 2
Attach hose to outdoor
spigot adapter.