Summary of Contents for Sowtech SVC1016
- Page 1 INSTRUCTION MANUAL Corded Vacuum Cleaner Model：SVC1016 HOUSEHOLD USE ONLY HOUSEHOLD USE ONLY Read this manual thoroughly before using and save it for future reference Read this manual thoroughly before using and save it for future reference...
-
Page 2: Table Of Contents
KNOW YOUR VACUUM CLEANER ......... 4 MAIN BODY PART INSTALLATION ........5-6 BRUSH HEAD INSTALLATION ..........SQUARE BRUSH INSTALLATION ..........8 CREVICE TOOL INSTALLATION ..........9 CLEANING & MAINTENANCE ......... 10-11 USER TIPS ................. 12 WARRANTY INFORMATION ..........13 SOWTECH BRAND .............. 14... -
Page 3: Important Safeguards
IMPORTANT SAFEGUARDS Read all instructions and keep them for future reference. Before using the appliance, check that the voltage of the wall outlet corresponds to the voltage marked on the rating plate. To protect against fire, electric shock, and injury do not immerse the power cord or plug in water or other liquids. - Page 4 IMPORTANT SAFEGUARDS WARNING To reduce the risk of fire, electric shock and personal safety: Do not use outdoors. Do not use on wet surfaces. Do not expose to rain. Store indoors. Do not handle plug or appliance with wet hands. Do not use to absorb water or other liquids.
-
Page 5: Specifications
SPECIFICATIONS... - Page 7 Press and hold the dust container button to open the dust container; Place the metal filter first; Then put the sponge filter;...
- Page 8 Then put the HEPA thin filter; Place the filter holder; Finally, press and hold the dust container button, close the dust container,...
- Page 9 Push and press the floor brush onto one of the extension tubes; Install the extension tube with the floor brush to the other extension tube; Finally, install the above parts to the main body of the vacuum cleaner. Once the installation is com- plete you can connect the power cord to the outlet;...
- Page 10 Push and press the square brush onto one of the extension tubes; Finally, install the above parts to the main body of the vacuum cleaner; Once the installation is com- plete you can connect the power cord to the outlet;...
- Page 11 Push and press the crevice tool onto the main body; Once the installation is com- plete you can connect the power cord to the outlet;...
- Page 12 1. Press and hold the dust container 2. Carefully remove the filter kit 3. Empty the dust from the dust button to open the dust container; (hold the dust container at container; this time to prevent the dust inside from falling out); 4.
- Page 13 2. Rear sponge filter to be cleaned occasionally to ensure optimum performance; 3.Accessory tools must be completely dry before putting into operation; 4.Keep this away from any liquid. Wipe with a dry cloth. -11-...
-
Page 14: Square Brush Installation
The vacuum cleaner is suitable for use on hard floors, not for shag carpet. We recommend that you clean the filter and sponge after each use. Replace metal and sponge filters regularly, depending on the frequency of use, to avoid clogging and not working. If the vacuum cleaner is used continuously, the motor does not dissipate heat as quickly and may feel like it is overheating. -
Page 15: Warranty Information
WARRANTY INFORMATION The manufacturer provides warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 12 months, starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship. The warranty will not apply in cases of: - Normal wear and tear. - Page 16 MAKE LIFE BETTER...
Need help?
Do you have a question about the SVC1016 and is the answer not in the manual?
Questions and answers