TABLE OF CONTENTS Product Registration Important Precautions Important Safety Instructions Important Safeguards Hardware Kit Assembly Instructions Manufacturer’ s Limited Warranty Exploded View Parts List WARNING: This product can expose you to chemicals including Toluene and Acrylamide which are known to the State of California to cause Cancer and birth defects or other reproductive harm.
SOLE will do all we can to make your ownership experience as pleasant as possible for many years to come. If you have any questions about your new product contact SOLE Fitness at 866-780-SOLE (7653). If you have a technical problem with your new Dumbbell contact SOLE technical service at 866-MYSOLE1 (1-866-697-6531).
Do not attempt to remove any shrouds or modify the Strength Equipment. WARNING Your Strength Equipment manufactured by SOLE Fitness is designed for the exercise in a consumer environment. Please check with your physician prior to beginning any exercise program.
Over exercising may result in serious injury or death. If you feel faint, if you become short of breath, or if you feel pain while exercising, stop immediately and cool down. SOLE FITNESS® and the SOLE Fitness logo are registered trademarks of Dyaco International. IMPORTANT SAFETY INSTRUCTIONS This chapter includes precautions and fitness safeguards for the installation and use of the manufactured by SOLE.
M10x70mm Bolts(16), eight mm Washers(20), four M10 Nylon Nuts(22). Φ10 Note: DO NOT COMPLETELY TIGHTEN THE HANDWARE AT THIS TIME. STEP2: Attach Center Cross Bar(5) to Stand Legs(1). Using two M8x65mm, four Φ8 Washers(21), two M8 Nylon Nuts(22). SW100 ADJUSTABLE DUMBBELL...
Page 8
STEP3: Attach Dumbbell Platforms(6) to Stand Legs(1). Using four M10x70mm Bolts(16), eight Φ10mm Washers(20), four M10 Nylon Nuts(22). STEP4: Attach Connect Plate(8) and Water Bottle Tray(7) to Dumbbell Platforms(6). Using six M6x16mm Bolt(18),eight six M6 Nylon Nuts(24). SW100 ADJUSTABLE DUMBBELL...
Page 9
(2) Attach Media Tray(10) to Adjustable bar(9). Using M10x80mm Bolt(15), two Φ10mm Washers(20), M10 Nylon Nuts(22). Note: COMPLETELY TIGHTEN THE HANDWARE AT THIS TIME. STEP6: Attach Dumbbell Tray to Dumbbell Platforms(6). Using four M6x75mm Bolts(25), four Φ6mm Washers(26), four M6 Nylon Nuts(24). SW100 ADJUSTABLE DUMBBELL...
Product use in any environment other than a residential setting. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THEWARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. SW100 ADJUSTABLE DUMBBELL...
Adjustable bar Media Tray Leveler Φ50mm Cap □38mm Cap M10x100mm Bolt M10x80mm Bolt M10x70mm Bolt M8x65mm Bolt M6x16mm Bolt Bushing Φ10mm Washer Φ8mm Washer M10 Nylon Nut M8 Nylon Nut M6 Nylon Nut M6x75mm Bolt Φ6mm Washer SW100 ADJUSTABLE DUMBBELL...
Page 13
Before returning your Sole product to any retailer, or if you require any assistance with assembly or technical support please call us first for assistance at 866-697-6531. Thank you for your Sole purchase. SW100 ADJUSTABLE DUMBBELL...
Need help?
Do you have a question about the SW100 and is the answer not in the manual?
Questions and answers