DESCRIPTION OF THE APPLIANCE drip pan shaped wire rack (if supplied) thermostat dial crumb tray timer dial M top heating element indicator light inside light (if supplied) function selector dial griddle rack (if supplied) glass door bottom heating element flat wire rack Thank you for choosing this Mini Oven.
Page 3
minate the "new" smell and any smoke caused by the pre- never rest anything on top of the appliance (utensils, wire sence of protective substances applied to the elements be- racks, other objects). fore transport. During this operation, ventilate the room. •...
SUMMARY TABLE Function Thermostat dial Wire rack and Program selector dial Notes/Tips position accessory position position Defrost • (only on some models) 60°-220° Delicate cooking Keeping food warm 60° Ideal for lasagna, meat, cakes in general, foods that should be crunchy on the surface and bread.
USING THE CONTROLS TRADITIONAL OVEN Thermostat dial (A) COOKING, KEEPING Select the desired temperature, as follows: FOOD WARM • To defrost (only on some models) (see page 14): Thermostat (top heating element and dial in the “•” position. bottom heating element on) •...
Defrosting (only on some models) Keeping food warm For full defrosting in a short time, proceed as follows: • Turn the thermostat dial (A) to the “60°C” position. • Turn the function selector dial (D) to the position. • Turn the function selector dial (D) to the position.
Traditional oven cooking • Select the required temperature by turning the thermostat dial (A). This function is ideal for all types of fish, pizzas, stuffed vegeta- • Turn the Timer dial (B) to the desired time. bles, cakes with whipped egg-whites and cakes that require long •...
Cooking on 2 levels at the same time with the CLEANING AND MAINTENANCE convection oven (only on some models) Frequent cleaning prevents the formation of smoke and bad odours during cooking. Do not let fat accumulate inside the ap- The convection oven function allows different foods to be coo- pliance.
TECHNICAL DATA graph. Should you need to replace the fuse in the plug supplied, a 13 amp approved BS 1362 fuse must be used. (refer to wiring Net weight 5 kg instructions for use rating) If the plug supplied does not fit your Absorbed power 1400 W socket outlet, it should be removed from the mains lead and dis- Frequency 50/60 Hz...
Need help?
Do you have a question about the E012001 and is the answer not in the manual?
Questions and answers