Advertisement
4. Plug your new cable modem power adapter into a power point. Connect the
adaptor power plug into the cable modem and turn the power point on.
The cable modem will commence the synchronisation sequence which may
take up to 30 minutes to complete.
5. Finally, connect the Ethernet cable and telephone cable (if applicable) into
the rear panel of your new cable modem. (Refer to diagram page 4). You can
keep the extra Ethernet & USB cable that comes with your new modem as a
spare or to connect other devices to your computer in future.
6. Plug the computer and all connected hardware back into the corresponding
power point(s), turn the power on at the power point and then turn the
computer on.
7. To activate your new modem, launch your web browser and go to
newmodem.optuszoo.com.au You will be asked to login with your Optusnet
username and password, Please follow the steps online to activate your
new modem.
6
1379876 0411 164391.indd 6
8. I
p
m
9. I
a
a
Note:
If you'
to http
Premi
Speed
13/04/11 9:39 AM
Advertisement
