Page 1
Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 Created: October 10, 2013 Revised April 30, 2025...
Page 2
(e.g. Vol, track control etc.) remain operational. NO EXCEPTIONS!! Connect the CCUMRA1 6-pin female (See Fig. 3) to the 6-pin male plug on remote extension cable (already fitted)- See Fig. 1 Complete the installation by following the installation steps included...
Page 3
Gen. 8-pin radio (e.g. M309 etc.) See Fig.1 to work with a 2 Gen. 8-pin remote (e.g. MW1 etc.) See Fig, 4; the CCUMRA2 is required. Gen. 8-pin remote (e.g. CMR-C5 etc.) See Fig.4; both the CCUMRA1 and CCUMRA2 are required.
Page 4
My boat has a Clarion radio and I have a NON-Clarion remote. Will the Frequent ask question & troubleshooting CCUMRA2 work? The CCUMRA2 only works in Clarion marine applications. What is the difference between Clarion 1 , and 3 Generation...
Need help?
Do you have a question about the CCUMRA1 and is the answer not in the manual?
Questions and answers