Sharp GX33 User Manual page 100

• Devices that do not have a user interface have a
factory-set passcode (i.e. headsets and car kits - see
the device user guide).
• If the Bluetooth wireless function is off before
searching, the phone turns the Bluetooth wireless
function on automatically and starts searching.
• When you wish to perform the device search again,
the device list where all devices searched will be
displayed when selecting "Search for Devices"
again in step 1. Highlighting "New Devices" at the
top of the list and pressing e will resume the new
search and refresh the list.
• You can only select one device for pairing. To change
the paired device, see "Handsfree Devices" on this
page.
Handsfree Devices
You can activate, rename, and delete the paired
handsfree device in the list.
To Activate a Device
→
"Settings" "Connectivity"
"Handsfree Devices"
1.
Select the device you wish to activate.
→ →
"Bluetooth"
Tip
• You can save battery power by turning the Bluetooth
wireless function off while it is not in use. Turn the
Bluetooth wireless function off in "To Turn On or
Off" on page 98 or in "To Turn Off Automatically"
on page 100.
• During a call, you can divert voice call to the paired
device. Press [Options] and select "Enable
Bluetooth". If you wish to disconnect the paired
device, select "Disable Bluetooth".
To Rename a Device
→
"Settings" "Connectivity"
"Handsfree Devices"
1.
Highlight the device you wish to rename.
2.
Press [Options] and select "Change Name".
3.
Rename the device.
→ →
"Bluetooth"
Settings 99