Lucky miner LV07 Manual

Specification

Conditions for using "Luckyminer LV07"

Power Requirements:
Ensure the device is connected to a stable power source and meets the corresponding voltage and power requirements.

Environmental Conditions:
It is recommended to use the device in a dry, well-ventilated environment to avoid overheating or moisture.

1. Good ventilate;
2. It is prohibited to stack multiple devices or place them close together;
3. Do not place the device in a confined space.

Temperature Range:
Operate within ≤30℃ to ensure device stability and performance.

Equipment heat dissipation:

1. Ensure smooth ventilation at the air inlet and outlet of the device.
2. Blocking the air inlet and outlet of the device is strictly prohibited.

Network Connection:
Ensure the device is properly connected to the network and compatible with the selected mining pool protocol.

Maintenance:
Regularly clean the device and pay attention to maintaining the cooling system to ensure proper operation.

Usage Restrictions:

1. Avoid using the device in excessively harsh environmental conditions and adhere to manufacturer's recommendations and warnings to maintain long-term stability.
2. It is prohibited to upgrade to unofficial firmware. No after-sales service will be provided when upgrading firmware under unofficial guidance.

Recommended parameters

1. Frequency: ≤575MHz, when the power consumption is >28W, please gradually reduce the frequency;
2. Core voltage: ≤1300mV, when the power consumption is >28W, please gradually reduce the voltage.

Mining Mode

Mineable projects

Notes:

• LV07 is applicable to all SHA256 algorithm projects;
• For more mining pools, please refer to https://miningpoolstats.stream/bitcoin;
• Due to regional and mining pool access difficulties, LV07 cannot access all mining pools.

Operating instructions

Product list

1. LV07 miner * 1
2. Adapter(12V/5A,100-240V Input) *1
3. AC line *1

Power on

1. Connect the AC cable to the adapter Input;
2. Connect adapter output to miner DC port;
3. After power on, the adapter indicator light is green, the miner fan is running, and the miner screen displays "connect to ssid: Lucky_ ****".

Connect to network

1. Search for the miner hotspot "Lucky_ ****" through Wi-Fi on your phone or computer;
2. Select the "Lucky_ ****" hotspot (mobile or computer);
3. Wait for 5-10 seconds, automatically redirect to the mining configuration interface;

Mining configuration

1. We can enter the settings interface in Connect to network Step 3 or by entering the IP in the browser;
2. Explanation of Setting Interface;

3. Settings completed, click the "Save" button;
4. After saving the settings, click the "Restart" button.

View running status

1. Restart completed, wait for 30-60 seconds, the Home page will display the real-time running status of the miner. Contains information such as "Overview", "Power", "Pool information", "Results", etc...
2. The miner screen will synchronously scroll to display the above information.

View the status of pool

1. Log in to the mining pool website or app used by Miner;
2. Check online device status through username or wallet address.

FAQ for Luckyminer LV07

No.	Fault Descripption	Fault pictures	Possible causes	Solution	Solving diagram
1	Miner is powered on but can not connect to WiFi		Using non 2.4G WiFi	Check WiFi type, must use 2.4G WiFi (Router/Hotspot)
			WiFi name or password has special characters	WiFi name and password must be in English/numbers, or a combination of English and numbers.
			The control IC is not started	When powered on, press the reset button to reset the main control chip (1-3 times).
2	Miner is powered on, the screen and fan do not work.		Power adapter output does not match.	Measure whether the adapter output voltage is 12V±3%. If it is not 12V±3%, replace the adapter.
3	Miner is powered on, the screen does not light up and the fan works.		The control IC is not started	When powered on, press the reset button to reset the main control chip (1-3 times).
4	The adapter light does not light up or keeps flashing.		The adapter does not output or the output is unstable.	Replace adapter.
5	WiFi, Power consumption is normal, hash value is 0.		Mining pool address	Check the mining pool address carefully and query mining pool related information https://miningpoolstats.stream/bitcoin	https://miningpoolstats.stream/bitcoin
			Port number	There may be multiple port numbers in the same mining pool. Generally, different port numbers correspond to the difficulty of access. Please choose the appropriate port number.
			Mining pool difficulty	All mining pools have a minimum access difficulty. Please ensure that the device computing power is below the mining pool access difficulty. Experience value: 500G can access a mining pool with difficulty <1000 (port number)
			Wallet address	You must use the mainnet wallet address of the currency being mined. For example: the BTC mainnet address generally starts with 1/3/bc1.
			Username	Some mining pools require a registered account to use. For this kind of mining pool, you need to fill in the miner name of the mining pool during configuration.
6	Miner runs with low power consumption, <5W		The control IC is not started	When powered on, press the reset button to reset the main control chip (1-3 times).
7	Successfully connected to WiFi, miner restarted repeatedly.		Mining pool resolution failed	Change mining pool.
8	Miner keeps restarting and the Hashrate is unstable.		WiFi congestion and instability.	Change to a stable WiFi or hotspot.
			Mining pools are regulated.	Change to a locally allowed mining pool or a well-known mining pool.
			High power consumption, high temperature, high temperature protection.	The environment temperature is <30℃, and the equipment should be placed in a well-ventilated place.