Sharp GX30 User Manual page 157

Assigning the Pictures
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures
1.
Perform steps 1 to 3 in "Opening the Phone Settings
Screen" on page 149.
Press a or b to highlight "Main Display", then
2.
press to select.
Press a or b to highlight "Assign Pictures", then
3.
press to select.
Press a or b to highlight the screen to set the
4.
picture, then press
Press a or b to highlight "Animation 1" or
5.
"Animation 2", then press
select "Power On" or "Power Off" in step 3.
Or press a or b to highlight "Pattern 1" or
"Pattern 2", then press
"Incoming" or "Alarm" in step 4.
The selected animation or picture is displayed.
6.
Press to set.
156 Settings
to select.
to select when you
to select when you select
Tip
• To cancel the picture setting, select "Default", then
press in step 5.