19 inch 3U rack version (1600R). Unless otherwise stated, the instructions in this User Guide refer to both models. The Multicharge 1600 lets you charge up to 16 devices capable of being charged via USB cable. From iPads, iPods and tablet PCs to smart phones, e-readers, GoPro cameras and more, the Multicharge 1600 will simultaneously charge up to sixteen USB chargeable devices in any configuration, whether they are all the same type of device,...
Safety instructions The Multicharge 1600 ('the charger') must only be used for its intended purpose in accordance with these operating and safety instructions. Do NOT operate the charger if any part of it including the plug, outer casing, sockets/ports or any of the cables are damaged.
2. Plug one end of the power cable into the charger. 3. Plug the other end of the power cable into a mains power outlet. The Multicharge 1600 is powered when the main power supply is connected and switched on. When powered, yellow LEDs on the charger...
Charging How to charge your devices: 1. Ensure that the Multicharge is connected to mains power and that no master computer is attached to it. (This is because if a master computer is connected to the charger, it will activate Sync Mode.) 2.
3. Connect to the charger all the devices that you wish to sync. These should all be the same type of device (e.g. all iPads) and can be connected to any of the Multicharge's 16 USB ports in any order. We recommend that you use the device manufacturers' original USB cables for this purpose.
Page 8
Notes • While in Sync Mode, the Multicharge 1600 will supply all connected devices with, at minimum, a trickle charge to ensure that they do not run out of power during the syncing process. This is particularly useful if you need to sync devices that are very low on power.
Troubleshooting Below are some basic troubleshooting tips. Q. No LED lights are illuminated even though the Multicharge is switched on. • Check that the power cable has been properly inserted into the Multicharge socket and that the other end is properly connected to the mains power socket (and if there is a switch, check that this is ON).
Page 10
Q. Device(s) will not sync • Check that the USB cables connecting each device to the Multicharge are properly inserted at both ends. • Check that the cables are not damaged. • Check that the USB cable connecting your computer to the Multicharge is properly inserted at both ends.
Product support • Firmware updates will become available when new device support is added. These can be downloaded from www.multicharge.com • The charger comes with a 3 year warranty from the date of purchase. • Only the manufacturer of the charger is authorised to carry out a repair.
Technical specifications Name Multicharge 1600D Multicharge 1600R Form Factor Desktop 19 inch 3U Rack Model No. iUSB-16WD iUSB-16BR Dimensions 255 x 120 x 130 mm 482 x 132 x 130 mm (10.04 x 4.72 x 5.12 in) (18.98 x 5.20 x 5.12 in) Weight 2.85 kg...
If an eligible claim on the Limited Warranty is received by Multicharge within the applicable Warranty Period, Multicharge will (at its sole option) either: (a) repair the Product or the defective parts at no charge, using new or refurbished replacement parts; (b) exchange the Product with a Product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original Product.
Need help?
Do you have a question about the 1600 and is the answer not in the manual?
Questions and answers