Summary of Contents for Tribesigns Little Tree HOGA-HL0118
Page 1
DESIGNED FOR LIFE Assembly Instructions Model No. Little Tree by Tribesigns Lockers HOGA-HL0118 www.tribesigns.com...
Page 2
DESIGNED FOR LIFE Contact Us We're here to help you. support@tribesigns.com 1-424-220-6888 Contact us anytime except 12:00 AM to 8:00 AM EST. Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, we're here to help. Please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.
Page 3
DESIGNED FOR LIFE We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. Install the Anti-Tip Straps Using the anti-tip straps can reduce the risk of tipping over, but can not eliminate it.
Page 4
DESIGNED FOR LIFE Make sure all parts are included. Most board parts are labeled or stamped on the raw edge. Contact us for a free replacement if you encounter any damaged or missing parts. P-02...
DESIGNED FOR LIFE Hardware List 2pcs 2pcs 2pcs 2pcs 2pcs 2pcs 2pcs 2pcs 2pcs 2pcs 8pcs P-03...
Page 6
DESIGNED FOR LIFE Hardware List 22pcs 14pcs 22pcs 4pcs 4pcs 4pcs 8pcs 4pcs 4pcs P-04...
Page 7
DESIGNED FOR LIFE Installation of Cams and Pins Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is opening to the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver until it is tightened.
Need help?
Do you have a question about the Little Tree HOGA-HL0118 and is the answer not in the manual?
Questions and answers