Summary of Contents for rovsun 818B
- Page 2 540*400*220 Group1 818A 360*390*220 Group 1 818B Ⅱ.Transportation and custody: During the process, the products should be mistreated, to prevent severe shock, packaging products generally not a good long-term outdoor storage, take a well-ventilated, non-corrosive gases within the warehouse, not inverted, the need for temporary storage, resistant measures should be adopted.
- Page 3 2.Power Up, Green-light, rotating clockwise direction respectively temperature control device, the temperature of the temperature required for alignment position, this bright orange light, power has for the rest of the furnace, heat pipe to start work, when the temperature of the required temperature, temperature control device can automatically cut off the power supply, while orange color light exterminated, heating stop.
-
Page 4: Warranty Cards
Warranty cards Product User name or names address Date of purchase Distribution units (Seal) Outgoing The products "wrapped", such as failure of users cannot be ruled out, I may or local maintenance department with the resolution, in the after-sale within six months free repair. a. - Page 5 It is recommended that products use separate lines and sockets to avoid circuit breaker or time delay fuse overload. The 820 / must connect to a separate, grounded wire, single phase, AC Only electrical supply with their own circuit breaker. These appliances must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes.
- Page 6 Black foot glue just needs to be twisted on by hand...
Need help?
Do you have a question about the 818B and is the answer not in the manual?
Questions and answers