Page 1
Assembly Instructions and Manual PL-3DWP - XS - S - M - L - XL For the safe use of this product, read and observe these assembly instructions and the manual before the first use. Intended use ® The PELVI.LOC PL-3DWP Waterproof is intended for people with restricted mobility, especially for pelvic positioning within the wheelchair and active-wheelchair and prevents from sliding forward.
Page 2
Assembly Assembly should be carried out by a person with specialist knowledge. 1. Place the paddings (a) on pelvic area / antecubital fold of the hip – With the ratchet (b) facing upwards. Afterwards, the logo on the padding should be readable from the front side! 2.
Page 3
Attention: ® The PELVI.LOC is not part of the restraint system for the wheelchair and/or user during transport in a vehicle for the transport of disabled persons. Neither the manufacturer nor the distributor will be liable, in the sense of product liability, for damages or risks caused by unattended children with regard to the product! Handling ®...
Page 4
Technical Data XXXS Seat width (cm) 12 - 20 16 - 24 20 - 32 30 - 40 36 - 46 44 - 52 Padding size (cm) 14 x 6 18 x 7 21 x 8 25,5 x 8 26,5 x 8,5 28,5 x 9 Weight (g) Predetermined...
Page 5
Manufacturer: This product complies with essential requirements of the EU Regulation 2017/745 on A2J GmbH medical devices – Medical Device Regulation Am Fuchsberg 13 (MDR) D-87452 Altusried Fon: +49 (08373) 987269 Fax: +49 (08373) 987276 eMail: info@a2j-intl.com Internet: www.a2j-intl.com As of 01.01.2025...
Need help?
Do you have a question about the PELVI.LOC PL-3DWP-XS and is the answer not in the manual?
Questions and answers