AirFly Pro
owner's guide
Pairing AirFly Pro with AirPods (TX)
Pairing AirFly Pro with Wireless Headphones (TX)
Pairing AirFly Pro with a Second Set of Wireless Headphones (TX)
Reconnecting Headphones to iPhone (TX)
Using AirFly Pro with an AUX-IN Port (RX)
Tips & Tricks
Charging
Turning AirFly Pro On & Off
Status Light Guide
To Begin, Select Transmit or Receive Mode
Transmit Mode: to connect AirPods or wireless headphones to any headphone jack
Transmit Mode (TX) is used to send audio from a wired headphone jack, such as an airplane TV
or treadmill at the gym, to your AirPods or wireless headphones.
Receive Mode: to wirelessly connect phone to AUX-IN
Receive Mode (RX) is used to receive Bluetooth audio from a device (such as a smartphone or
tablet) and send it to the AUX-IN port of a connected stereo (such as in a car, boat, etc).
Pairing AirFly Pro with AirPods (Transmit Mode)
1. To enter Pairing Mode on AirPods, first place AirPods inside charging case. With the lid
open, press and hold the button on the back of the Charging Case until the light flashes white.
2. Turn off Bluetooth on the devices that were connected to your AirPods. To enter pairing
mode, press and hold the Power Button for 4 seconds to turn on AirFly Pro. AirFly flashes
amber and white to indicate that it is in pairing mode.
If AirFly Pro does not flash amber and white, press the Reset Button on the right side to reset
to factory settings.
Need help?
Do you have a question about the AirFly Pro and is the answer not in the manual?
Questions and answers