1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder- ing iron, please be careful not to heat too long.
3 Troubleshooting Guide • How to clean the filter - Inlet (Filter) Turn the Switch off and remove the stains with the attached cleaning brush having a needle. NOTE: Do not use the Cleaning needle side. - Tank Turn the Switch off and clean the inside of the Tank with the attached cleaning brush. - Mist outlet Turn the Switch off and clean the hole of the Mist outlet with the attached cleaning needle.
6 Exploded View and Replacement Parts List Model No. : EH2513 Exploded View...
Page 6
Model No. : EH2513 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks EH2513CCGW CAP COVER ASS’Y 1 (GREEN) EH2513ATGW ATTACHMENT 1 (GREEN) EH2513MBDG1W MAIN BODY ASS’Y 1 (GREEN), (TAIWAN) EH2513MBDG2W MAIN BODY ASS’Y 1 (GREEN), (OTHERS)
Need help?
Do you have a question about the EH2513 and is the answer not in the manual?
Questions and answers