T-ONE TQL-101 Manual

NEED TO KNOW：
At the first time for use,The Smartpen must be matched to the bluetooth device
first (refer to the instruction of how to match the blue tooth).
If the first time match successfully, the pen can identify the same bluetooth
automatically and be used directly without matching.
Power on/off：
Pen can start after long press the power switch for 3 second.
Pen can start automatically once the refill under presure(Auto start,user
can shut down this function from the APP setting).
once the power on, the buzzer beeps and the LED light turns white.
After long press the power switch for 3 seconds,the LED light will turn off
after flickering 3 times,and the pen will shut down after buzzer beeps.
If stop using the pen for 20 minutes, the pen will shut down automatically
(user can adjust the time interval from the APP setting).
Handwriting record and transfer mode：
offline mode(store first and transfer later)：
Remark：When the pen working without connecting Bluetooth, all handwriting record
will be stored inside the pen memory, once connected the blue tooth, the date in the
pen memory will be transferred automatically to the receiver device.
Synchronous transfer(writing and transferring in the meantime)：
Remark： If writing with connecting the blue tooth, the handwriting record will be
transferred to Bluetooth device, the pen memory doesn't keep any date.
The definition of LED light color：
T-ONE Smartpen Manual b1.3