Advertisement
Quick Links
Advertisement
Related Manuals for Kinetcam X7C
Summary of Contents for Kinetcam X7C
- Page 1 Setup Guide Camera Model: X7C...
- Page 2 X7C-V0318 ●First-Time Use: ►Connect camera to a 5V USB charger (using included cable). Keep plugged in. ►Ensure your Wi-Fi has 2.4GHz (2.4G & 5GHz hybrid WiFi supported). ●Need Help? Setup Video: Scan QR ↓ ↓ Alternative Setup:Scan QR Tip: If setup fails, try the 2nd method via QR above.
- Page 3 page...
- Page 4 page Agree the prompts one by one to allow Go to your phone's settings and turn the app to access the camera and wifi. on Bluetooth. Keep it on during setup.
- Page 5 page...
- Page 6 page 5V1A 5V2A Push the switch firmly all the way to "ON" Place the camera and phone within feet of the WiFi router before setup. (You can move it to your preferred location after setup.) pressing Use a 5V/1A or 5V/2A USB adapter the reset button for 10 seconds then...
- Page 7 page Tap ' Add device' to connect Tap 'Allow' to add device. Note: Do not scan the QR code on the camera. Wait for the app to find the device via Bluetooth.
- Page 8 page Step 6: Allow APP to find Bluetooth devices If the page pops up ' Bluetooth not turned on', tap 'To open' and go to phone's setting to turn on bluetooth. Tap 'Allow' to find bluetooth device...
-
Page 9: Reset Button
page Step 7: Add the New Device the App found Reset button If the app doesn't find a device in 60 Wait app find the new device, seconds, press and hold the reset button tap 'add' to connect. for 10 seconds, then retry from Step 5. - Page 10 page Step 8: Input the WiFi name and password Check the wifi name and password, make sure it's correct. Then tap ' Confirm' If you see a popup saying, "Warning, the local network permission is not enabled", tap "To Open". Turn on "Local Network"...
- Page 11 Step 9: Waiting the Device Connect Successfully Wait for the 'Bound Success' message to confirm setup is complete. Waiting for the camera to connect the If the connection fails, go back to the network, it will load from 1% to 100% main menu and try again, or contact our customer support.
-
Page 12: Step 10: Name The Device
page Step 10: Name the Device... - Page 13 Step 11: Check the WiFi Singnal and Finish Setup...
- Page 14 page Important Reminders After Setup 1. The camera's alarm detection is OFF by default. To turn on alarms, go to Device List, click on Alarm, check "Alarm ON," and then click Confirm. 2. The camera needs to be plugged in; it can only run on its built-in battery for about 4 hours.
- Page 15 What if l see app prompts "Warning, if the local network permission is not enabled, the device cannot be configured normally" ? Go to your phone's settings, find the KinetCam app, and enable 'Local Network' permissions. Then try setting up the camera again.
Need help?
Do you have a question about the X7C and is the answer not in the manual?
Questions and answers