Hearing Insert Earphones are virtually identical to the original ER•3A • Lucid Hearing Insert Earphones are available in 10 ohm, 50 ohm, earphones at all audiometric frequencies and approximate the frequency and 300 ohm impedance. It is essential that the correct impedance...
Page 3
EAR TIP COUPLING INSTRUCTIONS FOR USE Foam ear tips developed for Lucid Hearing Insert Earphones have Refer to the audiometer manual for instructions on properly connecting the earphones. dimensions that ensure proper calibration and test accuracy. 2. Examine the ear canal for obstruction or excessive cerumen.
Page 4
7” Cable with Dual-Mono for both supra-aural and ER•3 Series insert earphones. See the Lucid 6.33 mm (1/4”) plugs or Alternate Cables Hearing Insert Earphones Calibration Manual for more information.
CABLE ATTACHMENT AND REPLACEMENT SPECIFICATIONS Firmly insert the cable connector in the corresponding transducer Impedance: 10 ohms or 50 ohms or 300 ohms housing socket until fully seated. Replacement cables are available through Etymotic Research and its authorized representatives. Sensitivity: 102.5 dB SPL in HA-2 coupler at 0.1 Vrms (10 ohms) 102.5 dB SPL in HA-2 coupler at 0.2 Vrms (50 ohms) Re-calibration of audiometric equipment is not required with cable...
SYMBOL DEFINITIONS WARRANTY Lucid Hearing warrants each insert earphone it manufactures to be free Indicates the entity importing the of defects in material and workmanship for a period of one year from medical device into the locale the date of sale to the original purchaser. Lucid Hearing’s obligation under this warranty is fulfilled, at Lucid Hearing’s option, by replacing...
Need help?
Do you have a question about the ER-3C and is the answer not in the manual?
Questions and answers