Page 1
Quick Start Guide Please Read Before Proceeding...
Page 2
Safety Information Don’t make or receive handheld calls while driving. And never text messages while driving. Keep your phone at least 15 mm away from your ear or body while making calls. Small parts may cause a choking. Your phone can produce a loud sound.
Page 3
Your phone may produce a bright or flashing light. Don’t dispose of your phone in fire. To prevent damage to the hearing ability, do not listen for a long time or in high volume Avoid extreme temperatures. Avoid contact with liquids. Keep your phone dry.
Page 4
Overview Receiver Display Left soft key Right soft key Call key End call key Keypad Camera Speaker...
Page 5
I. Phone Packaging Box The phone packaging box should contain the following items and accessories: Phone, Battery, Power Adapter, Quick Start Guide and USB-Cable. II. Installing SIM Card, Memory Card and Battery Make sure to always turn off the power before installing or replacing the SIM card and battery.
Page 6
panel facing down. Pull lower half of back cover with your thumb or fingers. Remove it from the opening. SIM Card The SIM Card contains your phone number, service details and the phone- book/message memory. Installing SIM Card 1. Make sure the phone is turned off. 2.
Installing Memory Card Insert the micro SD-card into the slot with its gold contacts facing down. Camera and photo gallery application can only be initiated after the installation of the TF card.
Charging the Battery When you first get your new phone you’ll need to charge the battery. Connect the adapter to the charger jack. Ensure that the adapter is inserted with the correct orientation. Do not force the connector into the charger jack. Connect the charger to a standard AC wall outlet.
Technical Specifications • 01 SIM • Network: UMTS 900/1900 MHz • Display: 2.4” • Memory: 128MB ROM + 64MB RAM (*) • Camera: 0.3MPx • FM/MP3/MP4 • Battery Capacity: 1000mAh Li-ion (*):The storage capacity actually available in the unit's internal memory may be less than the factory due to the preloading of the operating system and / or other pre- installed or configured applications.
Need help?
Do you have a question about the Dash and is the answer not in the manual?
Questions and answers