Alcoscent DA-7100 Instruction Manual

Display message
&
Problem-solving guide
WHAT IT MEANS ACTION
Full battery None required.
Empty battery : Warns when
battery is low. The unit can be
operated but recommended to change
new batteries
tor
correct result!
Replace new batte ri es.
II display "BAT", the unit can not be
operated, change new batteries
immediately.
DOL
LOfL
Replace new batte ries
immediately.
II the sampling volume is tOD
low or not sufficiently blow.
Press
CID
button again to
repeat the measurement.
II there is na breath sample blown
within 30 seconds, the LCD will
display "OUT".
Press
CID
button to restart
the countdown cyde and
retest.
ff
the unit is powered on outside of the
acceptable temperature range(0-40'C
or 32-104F) the unit will display it.
Repeat the test after the unit
has reached a temperature
within the operation range.
Technical specifications
0.000 - 0.500%BAC
Indication ol B.A.C. 0.00 - 5.00
%,
0.00 - 2.50mg/1
+/-
0.005%BAC at O.l%BAC at 25'C
Accuracy
+/-
0.05
%,
at 1.0
%,
at 25'C
+/-
0.025mg/1 at 0.50mg/1 at 25'C
Warm up time
Within 18 seconds at 0.05%BAC
Response time Within 10 seconds at 0.05%BAC
Sensor
Fuel cell sensor
Power supply 2 (two) AAA size alkaline batteries
Battery Lile Approx. 1000 tests
Dimensions(HxWxD) 48mm x 115mm x 18mm
Weight 93g induding batteries
Calibration Every 12 months or after 500 tests
Operating temperature 0- 40'C
Manufacturer / Distributor :