Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trek Bronco 1400E
Summary of Contents for Trek Bronco 1400E
- Page 1 Doc NO.:221400 Version NO:D1400 TREK Bronco User Manual 1400E...
-
Page 2: Electromagnetic Interference (Emi)
It is very important that you read this manual before using the scooter for the first time including the following information regarding the possible effects of Electromagnetic Interference ( EMI ) on the scooter. Electromagnetic Interference ( EMI ) This motorized scooter has an immunity of 20V/m which should protect it from Electromagnetic Interference from Radio Wave Sources. -
Page 3: Table Of Contents
Features ………………………………………………………………………………..4 and 5 Tiller and Seat ....................5 and 6 Control Panel Operation …………………………………………………………………… 7 Brake ……………………………………………………………………………..…………………………… 8 Fault Codes………………………………………………………....……………...………………8 Batteries ........................9 Battery Charging ......................9 Operation ........................9 Maintenance ......................10 Frequently Asked Questions ..................11 Imported and distributed by TREK Mobility Products trekmobility.com.au... -
Page 4: Preface
Preface Dear Customer: Congratulations on the purchase of your new mobility scooter. Your scooter design combines the most advanced state-of-the-art components with modern, attractive styling. We are certain that the design features and trouble-free operation of your scooter will add convenience to your daily living and ensure complete satisfaction. Before using the mobility scooter please make sure you have read this user’s manual carefully. -
Page 5: Safety Rules
Safety Rules 01- Do not ride the scooter without reading this instruction manual 02- Do not exceed the safe maximum climbing angle of the scooter 03- Do not exceed the maximum user weight at any time 04- Do not mount or dismount the scooter when the key is turned on 05- Do not operate or sit on the scooter if it is in free wheel mode 06- Do not turn suddenly at high speed 07- Do not drive your scooter where you cannot safely or legally walk... -
Page 6: Specification
Specification Model 1400E Motor 1400W PG S-Drive Controller 200A Length (mm) 1600 Width (mm) Height (mm) 1435 No Battery 120 Kg Weights With Battery 175Kg Front 13*6.50-6in Wheel Size Rear 13*6.50-6in Suspension Factory Max Speed 10 km/h Programmable Speed up to 14 km/h Turning Radius (mm) 1600mm... -
Page 7: Features
Features Tiller and Seat Adjustments Tiller The tiller position of this scooter can be adjusted to your needs to maintain a comfortable riding position. To adjust the tiller, hold the tiller in one hand tightly, and release the locking handle in other hand. -
Page 8: Control Panel Operation
Seat 1) Depth: The seat is equipped with slider, as shown in the Fig above. Pulling up the slider bar allows the seat to move forward or back to adjust the distance from the tiller or to provide more leg room. 2) Rotating: Hold the Seat Rotation Lever, then turn the seat around to your required position, release the Seat Rotation Lever to lock the seat. - Page 9 Key Switch & NFC Card: Turn the key clockwise to operate the scooter. The TFT(Thin Film Transistor) LCD (Liquid Crystal Display) display will light up indicating that power is on. OFF is anti-clockwise. Or put NFC on LCD to power on or off. Caution: Always make certain that the key is re- moved from the key switch before getting on or off your scooter or before lowering the tiller completely Or put NFC on LCD to power on or off.
- Page 10 1).NFC Light:Put the NFC card on the NFC light to power on and off the scooter.(No matter,the scooter is on or off .The NFC light will keep blinking) 2).Direction Lights(RH&LH):Press the direction lights button ,the direction lights on . Front Light:Press front light button,front light on . 3).Speed:Show the driving speed.
- Page 11 USB Charging Port and Bluetooth Connect the device to be charged to the USB port. See right photo. How to connect your Bluetooth? 1. Open Bluetooth on your Phone. 2. Search and find equipment named “baojie” . 3. Select “baojie” to connect it with your phone. Now you can use your phone . USB Disclaimer: The supplied USB charging port is only intended to be used with appropriate smart devices such as phones or tablets.
-
Page 12: Brake
Brake Switch Knob: Showing as Above. In normal use, the braking system is automatically ON and controlled by the Joystick Bar. If the scooter needs to be pushed manually, just pull up this Brake Switch Knob. Warning: When the Brake Switch Knob is pulled up, the Auto Brake System will Not work. - Page 13 1:When the scooter in fault,ECU will start to flash and begin to diagnose the fault by showing fault code on the LCD,like E1,E2..(See below details to know what the fault code means) 2.During driving, when the battery voltage is low, the ECU will continue to flash... Please charge the scooter as soon as possible at this time.
-
Page 14: Batteries
A throttle trip is indicated. Make sure the throttle is not engaged while turning on the scooter. E7-Throttle/Speed Control Fault A throttle trip is indicated. Indicates a problem with the throttle control or speed control. E8-Motor Disconnected The motor has a bad connection. Check all the connections and from the motor. E9-Possible Controller Trip A control system trip is indicated. -
Page 15: Operation
Operation Make sure the batteries are fully charged. Please make sure all the tires are inflated. Sit on the seat and adjust the tiller and seat so you are in a comfortable position. Insert the key into the Key Switch and turn to the ON position. Turn the Speed Knob to “Turtle”... -
Page 16: Faq & Solution
Monthly Routine Inspection Inspect the Tire air Pressure . This should be in the range of 30-35 PSI Test run the scooter as above. Inspect the brake system. Check the tire status. If any tires torn, please call you dealer to replace. Test run your scooter as above. - Page 17 The LED indicator on the charger shows the charging status as following: RED: Power connected; ORANGE: Charging; GREEN: Charging Complete. 05. My new batteries are not performing very well? New batteries need to be cycled 5~6 times (charging/discharging) before they reach Maximum capacity.
-
Page 18: Warranty
Warranty Warranty Terms & Conditions. A copy of this page is to be supplied with any claim. Frame - 2 Years, Motor & Transaxle - 2 Years, Other Parts - 12 Months The importer warrants that the frame will be free from defects under normal use for a period of 2 Years and the Transaxle &...
Need help?
Do you have a question about the Bronco 1400E and is the answer not in the manual?
Questions and answers