TECHWOOD TP-3034 Instruction Manual

Electric multifunction cooker & pizza pan

Advertisement

TP-
3034
ELECTRIC MULTIFUNCTION COOKER
& PIZZA PAN
Instruction manual
TP-3034 = 30cm
TP-3842 = 38cm
Dear consumer, Please read these instructions carefully before use in
order to avoid damage due to incorrect use and to better understand the
functions of this product. Please pay particular attention to the safety
guide.
If you pass the device on to a third party, these Operating Instructions
must also be handed over.
Please keep them for future references.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP-3034 and is the answer not in the manual?

Questions and answers

Summary of Contents for TECHWOOD TP-3034

  • Page 1 3034 ELECTRIC MULTIFUNCTION COOKER & PIZZA PAN Instruction manual TP-3034 = 30cm TP-3842 = 38cm Dear consumer, Please read these instructions carefully before use in order to avoid damage due to incorrect use and to better understand the functions of this product. Please pay particular attention to the safety guide.
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS Please read these instructions carefully before use.  Keep present instructions for future references.  Check that your mains voltage corresponds to that stated on  the appliance. Only use the appliance for domestic purposes and household  or similar applications such as: - staff kitchen areas, in shops, offices and other working environments;...
  • Page 3 concerning use of the appliance in a safe way and understand the hazards involved. Keep the appliance and its cord out of reach of children aged less than 8 years. Cleaning and user maintenance shall not be made by children. Cooking appliances should be positioned in a stable situation ...
  • Page 4 Never wind the cord around the appliance and do not bend it  Ensure that the power cord does not come into contact with  hot parts of this unit. Make sure the appliance has cooled down before cleaning  and storing it.
  • Page 5: General Information

    This appliance is only intended for household use.  The connector must be removed before the appliance is  cleaned and the appliance inlet must be dried before the appliance is used again. Competent qualified person: after sales department of the producer or importer or any person who is qualified, approved and competent to perform this GENERAL INFORMATION...
  • Page 6: Cleaning And Maintenance

    The symbol "HOT SURFACE" warns that the surface are liable to get hot during use. The symbol "STEAM" warns the user that steam can escape from the unit and to take all necessary precautions. (Risk of burns) The symbol "GLASS / FORK" means that the device is compatible and can come into contact with foodstuffs.
  • Page 7 Do not use abrasive cleaners, gritting, or metal brush or another cutting object. TO KNOW YOUR APPLIANCE Unit overview: 1 Glass cover handle 2 Power connection base 3 Basic unit 4 Handles 5 Cooking surface 6 Glass cover Temperature sensor: 1 Temperature sensor 2 Electric plug 3 Electric cable...
  • Page 8 Preparing the unit NOTE : The surface of this device will remain in good condition for a long time if you take some precautions : a) Do not use metal objects such as knife, fork, etc.. This could damage the unit.
  • Page 9 lamp goes out. You can then start cooking the food. Once cooking is complete, the unit can be kept warm. To do this, set the temperature regulator to the thermostat level. Using the cover: Use the glass cover where possible when cooking all food types.
  • Page 10: Specifications

    -Do not wrap the cord around the appliance, as this will cause damage. -Keep the appliance in a cool, dry place and out of reach from children. SPECIFICATIONS Power supply 220-240V~ 50-60Hz Power 1500W Size TP-3034 30cm and depth 4,3cm Size TP-3842 38cm and depth 4,3cm Norm Class I Made in P.R.C...
  • Page 11 This device complies with EC directives, it was controlled according to all current European directives, applicable such as: electromagnetic compatibility (EMC) and low voltage (LVD). This device has been designed and manufactured in compliance with the latest regulations and technical requirements for safety. This unit is equipped with an electrical outlet with earth and must be earthed in an according plug.

This manual is also suitable for:

Tp-3842

Table of Contents