Varan Motors PA200M Original Operating Instructions

Cable hoist

Hide thumbs

page of 14

/ 14
Bookmarks

Quick Links

Download this manual

Made in CHINA by / Fabriqué en CHINE par / Hergestellt in CHINA von /

Gemaakt in CHINA door / Fabricado en CHINA por / Prodotto in CINA da /

Fabricado na CHINA por / Vyrobené v ČINE od / Vyrobené v ČINE od /

Wyprodukowane w CHINACH przez: Varan Motors

mported by / Importé par / Importiert durch / Geïmporteerd door / Importado

por / Importato da / Importado por / Importované spoločnosťou / Dovezeno

společností / Importowane przez:

BCIE SARL

15 rue de Mensdorf,

L‐5380 Uebersyren,

Luxembourg,

+352/26908036

Need help?

Do you have a question about the PA200M and is the answer not in the manual?

Questions and answers

Summary of Contents for Varan Motors PA200M

Page 1 Made in CHINA by / Fabriqué en CHINE par / Hergestellt in CHINA von / Gemaakt in CHINA door / Fabricado en CHINA por / Prodotto in CINA da / Fabricado na CHINA por / Vyrobené v ČINE od / Vyrobené v ČINE od / Wyprodukowane w CHINACH przez: Varan Motors mported by / Importé par / Importiert durch / Geïmporteerd door / Importado por / Importato da / Importado por / Importované spoločnosťou / Dovezeno společností / Importowane przez: BCIE SARL 15 rue de Mensdorf, L‐5380 Uebersyren, Luxembourg, +352/26908036 "© 2024 BCIE SARL. All rights reserved." "© 2024 BCIE SARL. Tous droits réservés." "© 2024 BCIE SARL. Alle Rechte vorbehalten." "© 2024 BCIE SARL. Alle rechten voorbehouden." "© 2024 BCIE SARL. Todos los derechos reservados." "© 2024 BCIE SARL. Tutti i diritti riservati." "© 2024 BCIE SARL. Todos os direitos reservados." "© 2024 BCIE SARL. Všetky práva vyhradené." "© 2024 BCIE SARL. Všechna práva vyhrazena." "© 2024 BCIE SARL. Wszelkie prawa zastrzeżone." ...
Page 2 CABLE HOIST Original Operating Instructions PA200M PA300M PA400M PA500M PA600M PA800M PA1000M BCIE SARL Gruuss-strooss 28, L-9991 Weiswampach...
Page 5 Important! When using this equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well.
Page 6 13. Keep children and other unauthorized persons away from the machine. 14. Do not pull loads sideways or from one side. Do not allow the load to swing. 15. Ensure that the hook moves in the same direction as shown on the control switch. 16.
Page 7 11. Remote control 12. Power cable 13. Control cable 14. Motor 15. Return roller 16. Additional hook 17. Cable for remote control 3. Technical data Type PA200M PA300M PA400M PA500M PA600M PA800M PA1000M Rated voltage Rated frequency Power consumption 500W...
Page 8 the machine’s capacity. The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.
Page 9 control mechanism for signs of possible transit damage. 6.2 Assembly (Fig. 5) The cable hoist is fitted with two fastening clamps (1) with which it has to be fastened to a rectangular tube. The dimensions of the arm must conform with the size of the fastening clamps and must be capable of supporting twice the rated load.
Page 10 be taut when the load is raised. 7. The motor (14) for the cable hoist is fitted with a thermostat switch. Whilst the cable hoist is operating, the motor (14) may therefore stop. It will restart automatically when it has cooled down.
Page 11 Overload cable winch is not suitable continuous operation. The motor is protected from overload and overheating by a temperature switch. If the permissible operating time is exceeded, the motor temperature will increase the temperature switch will shut the cable winch off.
Page 12  In the following: One cycle means one raising and lowering movement of a load. Periodic inspection means an inspection after 100 cycles.  Test periodically that the limit switches on the cable hoist are in correct working order. Conduct this test as follows: When the cable has reached the maximum height, the lever on the automatic stopping mechanism (5) will be actuated.
Page 13 Never place any electric tools in your household refuse. To comply with European Directive 2012/19/EV concerning old electric and electronic equipment and its implementation in national laws, old electric tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Page 14: Problem Solving
Problem-Solving Common Malfunction Cause Solution The Off-On-Switch is used but 1. It is not plugged into the power 1. Connect the item to the power supply. the motor does not turn supply. 2. The wires are broken or ripped. 2. Check the wires and plug it in 3.

This manual is also suitable for:

Pa300m Pa400m Pa500m Pa600m Pa800m Pa1000m