Page 2
This document must be delivered to and read by the end user and installer as it serves to provide you with the required information for proper and safe use of your STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
Page 3
Grommets, cable ties, looms, and other installation hardware should be used to anchor and protect all wiring. Fuses should be properly sized and located as close to the power take off points as possible to protect the wiring and device. To protect against short circuits, a fuse is included by STL for all products.
Page 4
DUAL CARBINE ® OFF ROAD / WORK LIGHT Wiring Diagram Wire Color Function Positive Red* Negative Black* * Indicates a main power cable. Specifications Voltage 10-30 VDC Amps < 35 Optic Flood / Hybrid LED Count Cable Length 19” to connector / 8.5” pigtail Lumens 18,240 Waterproof IP Rating...
Page 6
DUAL CARBINE ® OFF ROAD / WORK LIGHT Vehicle Specific Mounting Brackets (Sold Separately) • For Jeep brackets, remove existing hardware from the vehicle. Place brackets in mounting locations and refasten vehicle hardware. • For all other models, position the bracket forward on the vehicle roof such that the bracket sits flat against the surface of the vehicle. With user supplied hardware, mount the brackets to the vehicle.
Need help?
Do you have a question about the DUAL CARBINE 50 and is the answer not in the manual?
Questions and answers