SMARTENERGY MONITORING
GLASS PANEL HEATER
2000W
To get the most out of your new heater, please read
through these instructions and the attached safety
regulations before use. Please also save the instruction
manual in case you need to remind yourself of the heater's
functions later.
IMPORTANT: Before plugging the unit into the mains, ensure by visual inspection that the unit is intact and
has not suffered any damage during transit. These heaters are intended for domestic use only. They can be
used as both portable appliance and wall mounting appliance.
CAUTION: The appliance must be always placed on a flat and stable surface. To avoid a hazard due to inadvertent
resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly switched on and off by the utility. Some parts of the heater can
become very hot and cause burns. Do not touch hot surfaces. Particular attention must be given where children
and vulnerable people are present.
FOR YOUR OWN SAFETY:
1.
Read all instruction before using the heater.
2.
Only connect the heater to a single-phase socket
with a mains voltage as specified on the rating plate.
3.
Do not leave your home while the appliance
is in function: ensure that the switch is in OFF
position and the thermostat is in minimum position.
Always unplug the appliance when not in use. Do
not pull the cord to unplug the heater.
4. Keep combustible material such as furniture,
cushions, bedding, paper, clothes, curtains etc. away
from the heater.
5.
Do not hang anything on or in front of the heater.
Do not use to dry clothes or any fabric.
6.
Always use the heater in an upright position.
7.
Do not use the appliance in rooms less than 4m²
area.
8. Keep the air inlet and outlet free from objects at
least 1m in front and 50cm behind the heater.
9.
Close supervision is necessary when the heater is
in use around children, persons suffering from any
physical impairment and animals, the air outlet gets
hot during operation.
FANGP200xx-01 | DC.12.24
ADJUSTABLE
TRACK COST
RAPID HEATING
THERMOSTAT
TO RUN
10. Do not cover. If covered, there is the risk of
overheating.
11. Do not use this heater in the vicinity of water or
showers, bathtubs, wash basins or a swimming pool
etc.
12. Do not use the heater in the rooms containing
explosive gas inflammable solvents, varnish or glue.
13. Keep the heater clean. Do not allow any objects to
enter any ventilation or exhaust opening as this may
cause electric shock, or fire or damage to the heater.
14. If the heater has been dropped or damaged or
if any part of the heater or supply cord becomes
damaged, it must be inspected and or replaced by a
competent person.
15. Do not move the appliance while it is in operation.
16. The heater must not be located immediately below
a socket- outlet.
OVERHEAT
CHILD LOCK
SILENT
PROTECTION
User Manual
www.masterplug.com
Need help?
Do you have a question about the SMARTENERGY AURALINE FANGP200 01 Series and is the answer not in the manual?
Questions and answers