Advertisement

Lighting Control Engine 4
(Multi-Range PSU / turbo)
Information for Use
Read the Information for Use and the Safety Instructions
carefully. Subject to modification without prior notice.
Typographical and other errors do not justify any claim for
damages. Modification of the product is prohibited.
This manual is designed for electricians, system administrators,
and product users.
All product names and trademarks mentioned in this manual are
trademarks of their respective owners.
Except for internal use, relinquishment of the instructions to a
third party, duplication in any type or form - also extracts - as
well as exploitation and / or communication of the contents is not
permitted.
Downloads and more information at:
www.ecue.com
IC: CL25100005035, CL25100005735, CL25100005135
Edition:
10.04.25 [EN_LCE4_Setup_v1p1]
Published by:
Traxon Technologies Europe GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2025 Traxon Technologies Europe GmbH
All rights reserved
Traxon Technologies Europe GmbH
Sales Operations
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 5251 54648-0
support@ecue.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lighting Control Engine 4 and is the answer not in the manual?

Questions and answers

Summary of Contents for e:cue Lighting Control Engine 4

  • Page 1 Lighting Control Engine 4 (Multi-Range PSU / turbo) Information for Use Read the Information for Use and the Safety Instructions IC: CL25100005035, CL25100005735, CL25100005135 carefully. Subject to modification without prior notice. Typographical and other errors do not justify any claim for Edition: damages.
  • Page 2 Product — Information for Use Table of Contents Safety instructions Symbols General safety instructions General device description Lighting Control Engine 4 (turbo) Delivery content Optional accessories Product specifications Technical Data Connectors and Interfaces General remarks Transport Unpacking Warranty regulations Disposal Support...
  • Page 3: Safety Instructions

    Device components inside the system can reach high temperatures. Do not open content the system while in operation. Repairs may only be carried out by authorized, specially trained personnel. When in doubt, contact Traxon e:cue service. — To prevent the device from overheating, only operate it in well-ventilated environment.
  • Page 4: General Device Description

    Lighting Control Engine 4 (Multi-Range PSU / turbo) Designed to control large and complex projects, e:cue’s Lighting Control Engine 4, Lighting Control Engine 4 (Multi-Range PSU) or Lighting Control Engine 4 turbo,...
  • Page 5: Product Specifications

    Product — Information for Use | Product specifications mounted into a 19” rack. Delivery content Delivery content of the e:cue Lighting Control Engine 4 (Multi-Range PSU / turbo) / Lighting Control Engine (Multi-Range PSU) - Product number CL25100005035 / CL25100005735 / CL25100005135: •...
  • Page 6 Protection class IP20 Steel, front panel powder Housing coated Mounting in 19-inch rack with rails Product — Information for Use | Product specifications Certifi cations CE, UKCA Interface specifi cations 1 x USB 3.0 Type-C (front, behind cover) 2 x USB 3.0 (front, behind cover) 1 x USB 3.2 Gen2 Type-C (rear) 1 x USB 3.2 Gen 2 (rear) 4 x USB 3.2 Gen 1 (rear)
  • Page 7 Product — Information for Use | Product specifications Back panel LCE4 Back panel LCE4 turbo Main AC switch Main AC supply socket, IEC “Mainboard interfaces” (page 07)  content LCE4: 1 x Ethernet interface 10/100/1000/2500 MBits/s, RJ45 LCE4 turbo: 1 x HDMI Input Capture (top), 1 x DB9 Input Capture (bottom) 1 x HDMI (second from top) 3 x DisplayPort (bottom)
  • Page 8 Product — Information for Use | Product specifications 1 x PS/2 1 x USB 3.2 Gen2 2 x USB 3.2 Gen1 1 x Ethernet 10/100/1000/2500 MBits/s, RJ45 3 x Audio (Line In, Line Out, Microphone In) Antennae 1 x HDMI 2 x USB 2.0 1 x USB 3.2 Gen2 Type-C 2 x USB 3.2 Gen1...
  • Page 9: General Remarks

    Unpacking Only unpack the e:cue LCE4 (Mutli-Range PSU / turbo) at its installation location. To protect the device against condensation water, unpack it and wait until all moisture remaining in the device has evaporated. Condensation can occur when the device is moved from a cold to a warm location.
  • Page 10: Installation

    Connect cables and data only when the device is powered down. Mounting You can mount the Lighting Control Engine 4 (Multi-Range PSU / turbo) in all standard 19-inch rack systems. Use the provided rack mounting rails and screws to fasten the...
  • Page 11 LCE4 (Mutli-Range PSU / turbo) Operation Connect a display and input devices (keyboard, mouse) to the Lighting Control Engine 4 (Multi-Range PSU / turbo). Display and input devices are always necessary when accessing any application or settings on the LCE4 (Mutli-Range PSU / turbo). Connect the power supply and switch on the LCE4 (Mutli-Range PSU / turbo) with the power button.
  • Page 12 Network Settings LAS The e:cue LAS is pre-installed on the LCE4 (Mutli-Range PSU / turbo). The LAS is a software for creating light shows and controlling complex lighting projects, and to control your network and all devices in it. For the LAS to communicate with the network devices in the installation, the LAS has to be adjusted to the same network as all the other components.
  • Page 13: Troubleshooting

    Notice that only the network settings for the SYMPHOLIGHT application have been set now. If you have further network devices installed, each of these devices have to be configured separately. For further details on the LAS, see the System Manual e:cue LAS.
  • Page 14: Maintenance

     8 Maintenance content — Do not try to repair the device. Return it to your Traxon e:cue distributor for replacement or repair. — The red front panel of the device must be mounted in operation (fire enclosure). Remove the red front panel only when device is disconnected from mains.
  • Page 15 9 Dismounting Shut down the system and disconnect from main power. Disconnect all attached cables. Dismount the e:cue LCE4 (Mutli-Range PSU / turbo) from the rack. The dismounting is completed. Before dismounting, appropriate measures must be taken to protect the respective components against damage caused by electrostatic discharge (ESD protection).
  • Page 16 Product — Information for Use | Dimensions 11 Dimensions All dimensions in mm  content Please check for the latest updates and changes on the Traxon website. © 2025 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED. www.traxon-ecue.com...

This manual is also suitable for:

Lighting control engine 4 multi-range psuLighting control engine 4 turboLce4Lce4 multi-range psuLce4 turbo

Table of Contents