Bluetooth speaker lamp with wireless charging pad (4 pages)
Summary of Contents for Sharper Image 208687
Page 1
MOTION ACTIVATED PLACE ANYWHERE LIGHTS BY SHARPER IMAGE Item No. 208687 User Guide Thank you for purchasing the Motion Activated Place Anywhere Lights by Sharper Image. Please take a moment to read this guide and store it for future reference. - 1 -...
INTRODUCTION The Motion Activated Place Anywhere Lights by Sharper Image give you convenient lighting wherever you need it. These sleek, modern lights install with adhesive tape, so you can mount them anywhere. FEATURES • Motion-activated from 10 feet • 120-degree angle of detection •...
Page 3
INSTALLATION OPTION A: ADHESIVE 1. Remove the mounting bracket as shown above. Then, remove the protective film on the back of the bracket. 2. Stick the bracket onto the wall. Make sure the arrow on the bracket is pointing up. 3.
INSTALLATION OPTION B: SCREWS NOTE: Mounting hardware is not included. 1. Measure a distance of 1.97” (50mm) between two points for wall anchors. Use a pen to mark the drill points. 2. Use a drill bit to drill two 0.9” (23mm) deep holes and fully insert the wall anchors into the holes.
Need help?
Do you have a question about the 208687 and is the answer not in the manual?
Questions and answers