Related Manuals for Objecto H10
Summary of Contents for Objecto H10
- Page 3 H10 Top Filling Smart Humidifier Digital Display & Smart App Control...
- Page 4 READ AND SAVE THESE INSTRUCTIONS WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: in accordance with the specifications outlined in this manual. Only use the humidifier Usage other than what has been specified here may result in serious injury.
- Page 5 unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All service should be performed by qualified personnel only. 13.Do not plug the cord with wet hands: electric shock could result. 14.NEVER use detergent, gasoline, glass cleaner, furniture polish, and paint thinner, or other household solvents to clean any part of the humidifier.
- Page 6 carpeting, curtains, drapes, or tablecloths, to become damp. 28.Never leave water in the reservoir when the appliance is not in use. 29.Empty and clean the humidifier before storage. 30.Empty the tank and refill every third day. Before refilling, clean it with fresh tap water.
- Page 7 PRODUCT SPECIFICATIONS AND PARTS SPECIFICATIONS ITEM NUMBER: H10 Smart MODEL NUMBER: HM-63S-WH HUMIDIFYING MODE: Ultrasonic Top Fill Warm & Cool Mist POWER SUPPLY: 120V, 60Hz TANK CAPACITY: 6L/ 1.58 gallons DIMENSIONS: 8.78" x 8.78" x 18.7" (L x W x H - inches)
- Page 8 GETTING STARTED SET UP Select a firm, flat location - at least 12 inches away from any wall or object for proper air flow. Place the humidifier on a water-resistant surface, as water can damage furniture and flooring. Do not place unit directly on carpet, towels, blankets or other absorbent surfaces. We will not accept responsibility for damage caused by water spillage.
- Page 9 B. Remove the top cap and take the water tank off the unit base and fill the water tank with water before returning it to the base.
- Page 10 FUNCTIONS AND FEATURES POWER & WIFI BUTTON Short Press the Power Button to turn on or switch off the device. The LED screen displays the humidity level between 30% and 80%. If it displays “LO”, the humidity level of the ambient air is less than 30%. If it displays “HI”, the humidity level of the ambient air is more than 80%.
- Page 11 NIGHT LIGHT BUTTON press: The night light is activated and circulates through 7 colors automatically. -8th press: The night light will change in 7 colors press: The night will be turned off. HEATING BUTTON Press the Heating Button to turn the heating function on or off. HUMIDITY SETTING BUTTON Press the humidity setting button to set the targeted humidity level.
- Page 12 No Water in Water Tank or No Water Tank on the base If there is no water in the water tank, the Power Button will turn red and flash, and the LED screen will display E1. If tank is removed, the indicator of Power Button will turn red and the LED screen will display E2. ESSENTIAL OIL Aroma tray 1.
- Page 13 How to connect WIFI 1. Make sure your phone is connected to your WIFI Network (Not your phone data) during the processes of adding the device to your Smart APP. 2. Make sure the power button on the display is flashing. If not, press and hold the power button for 5 seconds to activate the WIFI connection.
- Page 14 Why isn’t my humidifier connecting to the app? Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device. • During the setup process, you must be on a secure Wi-Fi network. Confirm that the network is working correctly.
- Page 15 ULTRASONIC DISK 1. Unplug unit. 2. Remove the tank and empty all water from unit base and tank. 3. Locate the ultrasonic disk on the inside center of the base unit. 4. Use ONLY the enclosed cleaning brush to gently clean the disk and remove build up and deposits.
- Page 16 TROUBLESHOOTING GUIDE PROBLEM SOLUTION My humidifier does not work. Plug the humidifier into a working outlet and turn it on by pressing the power button. Make sure the tank is correctly attached to the base and filled with water. Little or no mist comes out Excessive Water: There may be too much water in the base chamber.
- Page 17 My humidifier is offline. Make sure the humidifier is plugged in. The humidifier may appear to be offline if it is unplugged, or if the outlet does not have power. Make sure your router is connected to the internet and your phone's network connection is working.
- Page 18 FCC Notice Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 19 FCC SDOC SUPPLIER'S DECLARATION OF CONFORMITY Hatzlachh Supply Inc. hereby declares that this equipment is in compliance with the FCC Part 18 Subpart B. The declaration of conformity may be consulted in the support section of our website, accessible from www.objecto.com...
Need help?
Do you have a question about the H10 and is the answer not in the manual?
Questions and answers