Table of Contents
Advertisement
Rear-Facing Installation
1
Loosen the harness.
a Lift harness adjuster lever
b Pull both harness straps forward
2
Remove the body pillow,
unbuckle the harness, and
remove the belly pad.
3
Pull the head pad up, then pull
the cover forward while pulling
the buckle through to access the
rear-facing belt path.
4
Route the vehicle seat belt
through the rear-facing belt slots,
then buckle. Ensure the vehicle
belt is not twisted.
Push the child seat down while
5
pulling the vehicle belt to remove
all slack (see pages 10 – 11).
6
Rear-facing installations can be
improved by the use of the
Versa-Tether (see pages 24 – 27).
7
Pull the buckle up through its
appropriate slot in the cover.
8
Replace the cover and belly pad.
38
1b
1a
3
4
5
Hide quick links:
Advertisement
Table of Contents
