Page 4
Step 1: Prepare the Wall Opening Measure and Mark the appropriate area on the wall where the unit will be installed. Ensure the opening is large enough to accommodate the evaporator section of the monoblock unit. The dimensions of the opening should align with the specifications provided in the unit manual.
Page 5
Do's: 1. Do Install in a Well-Ventilated Area Ensure the area around the unit, especially the condenser side, has good ventilation and is free from obstacles to allow for efficient heat dissipation. 2. Do Follow Manufacturer Guidelines Always refer to the manufacturer’s installation manual for specific details regarding dimensions, electrical wiring, refrigerant types, and maintenance procedures.
Page 6
6. Don’t Use Incorrect Refrigerants The unit comes pre-charged with refrigerant. Never attempt to use a different refrigerant, as this could damage the system. 7. Don’t Install Without Professional Help (If Needed) If you are not familiar with refrigeration systems, it’s recommended to have a professional technician install the unit. 8.
Need help?
Do you have a question about the RG-BYTCN10EL and is the answer not in the manual?
Questions and answers