ENGO CONTROLS PLUG EPLUG-ZB Quick Manual

PLUG
EPLUG-ZB | Smart Plug ZigBee
Quick Guide
Works with Powered By
GET IT ON
Available on the
Ver. 1.0
Release date: VIII 2024
Soft: V1.0.14
Producer:
Engo Controls sp. z o.o. sp. k.
43-262 Kobielice
Rolna 4 St.
Poland
www.engocontrols.com
Device description
3
1
2
1. Function button
Pressing for 10 seconds activates
pairing mode and factory reset.
- press 1 time - switch plug on/off
2. LED diode
Flashing - active pairing mode with
the application
Lights up continuously - device on
3. Connection socket
F-type appliance
(Schuko standard)
Technical specifications
Power supply 230V AC 50Hz
Max load 16(5)A
Comunication ZigBee 3.0, 2.4GHz
Dimensions [mm] Φ50x85
Introduction
The advanced Smartplug uses ZigBee 3.0 technology, and provides a full control of
your electrical appliances. It allows you to control electrical devices up to 3680W. The
temporary power consumption, current and voltage are visible in the ENGO Smart
app, where the history of switching ON/OFF and electricity consumption is also visible.
It is also possible to set a schedule or timer for the plug in the ENGO Smart App.
The ZigBee internet gateway is required for installation in the app.
Product features
Works with ENGO Smart (Compatible with Tuya App)
ZigBee 3.0 communication standard
Works as repeater
Safety and protection for children - current path shields
LED indicating operation status
Product Compliance
This product complies with the following EU Directives: 2014/53/EU, 2011/65/EU.
Safety information
Use in accordance with national and EU regulations. Use the device only as intended,
keeping it in a dry condition. The product is for indoor use only. Installation must be
carried out by a qualified person in accordance with national and EU regulations.
Installation
Installation must be performed by a qualified person with appropriate electrical qual-
ifications, in accordance with the standards and regulations in force in a given country
and in the EU. The manufacturer is not responsible for non-compliance with the in-
structions.
ATTENTION:
For the entire installation, there may be additional protection requirements, which the
installer is responsible for.