Before First Use - Breville ikon BMO200 Instructions Manual

Breville recommends safety first
• It is recommended to regularly inspect the
appliance. Do not use the appliance if power
supply cord, plug or appliance becomes
damaged in any way. Return the entire
appliance to the nearest authorized Breville
Service Centre for examination and/or repair.
• Any maintenance, other than cleaning,
should be performed at an authorized Breville
Service Centre.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice.

WARNING: CheCk the OveN fOR ANy DAMAGe, SuCh AS MISAlIGNeD OR
BeNt DOOR, DAMAGeD DOOR SeAlS AND SeAlING SuRfACe, BROkeN OR lOOSe
DOOR hINGeS AND lAtCheS AND DeNtS INSIDe the CAvIty OR ON the DOOR. If
theRe IS ANy DAMAGe, DO NOt OpeRAte the OveN AND CONtACt A BRevIlle
SeRvICe CeNtRe.
8
BMO200_IKON_MICROWAVE_V4.indd 8
continued

Before first use

Remove and safely discard any packaging
material and labels before using the Breville
ikon™ Microwave Oven for the first time.
Carefully unpack the Breville ikon™ Microwave
Oven and keep all the packing material until
all the parts of the microwave oven have been
found and the appliance has been assembled.
It is recommended to keep all the packing
material in a safe place in case you wish to re-
pack the product for shipping purposes.
To remove any dust that may have accumulated
during packing, wash the roller ring and glass
turntable tray in warm soapy water, rinse in
clean water then dry thoroughly. Wipe the
interior and exterior of the microwave oven with
a soft, damp cloth then dry thoroughly.
4/7/08 11:49:59 AM