Page 2
• The contents of LG Easy Guide are subject to change without prior notice. • Use, duplication, or reproduction of any part of LG Easy Guide without prior permission from LG Electronics Inc. is strictly prohibited. • LG Electronics Inc. does not provide warranty for data loss. In order to minimize damage from data loss, please make backup copies of important data.
Page 3
• The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. •...
Page 4
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
100 GB Storage Device (HDD, SSD, eMMC): 100,000 MB / 1,000 Bytes = 100 GB Windows Windows use the binary definition of 1 KB = 1,024 Bytes. 100 GB Storage Device (HDD, SSD, eMMC): 100,000 MB / 1,024 Bytes = 97.6 GB RAM Capacity RAM capacity shown by Windows may be lower than the actual capacity because the PC uses shared memory for BIOS and the integrated graphics card.
Page 6
Product Installation/Usage Precautions Caution: Place the machine in a safe place so it does not fall. • If dropped, the machine may be damaged or cause an injury. Use the product in a clean, dust-free environment. • Otherwise, the system may not function properly. Do not place any objects within 6 inches of the PC.
Page 7
Do not leave any objects such as a pen between the keyboard and the screen. • You might break the screen by unwittingly closing the PC with a foreign object remain ing on the keyboard. Do not tap or scratch the screen with a sharp object. •...
Page 8
Make sure that the memory cover is securely closed before turning on the PC. • Do not use the machine when the memory cover is open. It may damage the machine. Please use parts certified by LG Electronics Inc. • Otherwise, a fire or product damage may occur.
Page 9
Do not use the machine in damp places like a laundry room or bathroom. • Moisture may cause a glitch or electric shock. • Please use the machine within the appropriate temperature range (50 °F to 95 °F) and humidity range (20 % RH to 80 % RH). Clean the PC with a proper agent and dry it completely before using it again.
Page 10
Do not put your finger or an object into PC ports. • An injury or electric shock may occur. Ask one of our engineers to run a safety check after your computer has been repaired. • Otherwise, an electric shock or fire may occur. For minors, we recommend a program that blocks access to illegal or pornographic web sites.
Page 11
Do not put in metal items such as coins, hair pin or other irons or inflammables such as pa per or matches. Especially, ensure that children will not do so. • There is a risk of product damage, fire, or electric shock. •...
Page 12
Do not throw or disassemble the battery. • The resulting damage may cause an injury, explosion, or fire. Use batteries certified and acknowledged by LG Electronics Inc. • Otherwise, an explosion or fire may occur. Prevent the battery from being in contact with any metallic object like a car ignition key or a paper clip.
Page 13
Do not dispose of a spent or backup (standby) battery arbitrarily. • It may explode or cause a fire. • Disposal methods may differ by country and region. Dispose of spent batteries in accor dance with the laws and safety rules of the country and region you reside in. If you find leakage or smell bad odor from the battery, remove the battery and contact the call center.
Page 14
Do not use loose plugs or damaged power cords. • An electric shock or fire may occur. Do not touch the power cord with your hands wet. • Otherwise, an electric shock may occur. Pull the plug, not the cord, to disconnect the adapter and power jack. •...
The manufacturer is not responsible for any data loss. We do not refund or replace a product that malfunctions due to the installation or use of an operating system other than the one provided by LG Electronics Inc. • Some software applications may not work properly in other operating systems. Such mal...
ENERGY STAR® ENERGY STAR® Specifications • LG Electronics Inc. participates in ENERGY STAR® and the energy efficiency of this product complies with the specifications of ENERGY STAR®. • ENERGY STAR® is a set of regulations that encourages manufacturers of electronic devices to create more energy efficient products.
ESPAÑOL • Por la presente, LG Electronics declara que el tipo de equipo de radio ordenador cumple con la Directiva 2014/53/ El texto completo de la declaración de conformidad con la legislación de la Unión Europea está disponible en el...
Page 18
Nord (UK(NI)), Suïssa (CH), Islàndia (IS), Liechtenstein (LI) i Noruega (NO). PORTUGUÊS • Pela presente, a LG Electronics declara que o computador tipo equipamento de rádio está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço da Internet: http://www.lg.com/global/support/cedoc/cedoc#...
Page 19
Liechtensteinban (LI) és Norvégiában (NO) érvényes. NEDERLANDS • Hierbij verklaar ik, LG Electronics, dat het type radioapparatuur PC conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: http://www.lg.com/global/support/cedoc/cedoc# De 5150-5350 MHz- en 5945-6425 MHz-band kunnen (indien van toepassing) alleen binnenshuis worden gebruikt.
Page 20
Liechtenstein (LI) şi Norvegia (NO). FRANÇAIS • Par la présente, LG Electronics déclare que l’équipement radio de type PC est en conformité avec la Directive 2014/53/EU. Le texte intégral de la déclaration de conformité UE est disponible à l’adresse suivante: http://www.lg.com/global/support/cedoc/cedoc#...
Page 21
• LG Electronics erklærer herved at radioutstyret av typen PC er i samsvar med Direktiv 2014/53/EU. Den fullstendige teksten til EU-samsvarserklæringen er tilgjengelig hos følgende internettadresse: http://www.lg.com/global/support/cedoc/cedoc# Bruken av 5150–5350 MHz og 5945–6425 MHz-båndet (hvis aktuelt) er begrenset til innendørs bruk.
Page 22
Efficiency at low load (10 %) (%) 81.30 83.78 83.29 82.20 No-load power consumption (W) 0.21 English: Manufacturer’s name or trade mark, commercial registration number and address Català: Nom del fabricant o marca, número de registre mercantil i adreça Danish: Producentens navn eller varemærke, andelsregisternummer og adresse Dutch: Naam of handelsmerk van de fabrikant, handelsregisternummer en adres Finnish: Valmistajan nimi tai tavaramerkki, kaupparekisterinumero ja osoite French: Raison sociale ou marque déposée, numéro d’enregistrement au registre du commerce et adresse...
Page 23
Danish: Indgangsspænding Dutch: Voedingsspanning Finnish: Ottojännite French: Tension d’entrée German: Eingangsspannung Hungarian: Bemenő feszültség Italian: Tensione di ingresso Polish: Napięcie wejściowe Protuguese: Tensão de entrada Romanian: Tensiune de intrare Spanish: Tensión de entrada Swedish: Ingående spänning Norwegian: Inngangsspenning English: Input AC frequency Català: Freqüència d'entrada de CA Danish: Inputvekselstrømsfrekvens Dutch: Voedingsfrequentie...
Page 24
Protuguese: Tensão de saída Romanian: Tensiune de ieșire Spanish: Tensión de salida Swedish: Utgående spänning Norwegian: Utgangsspenning English: Output current Català: Corrent de sortida Danish: Udgangsstrømsstyrke Dutch: Uitgangsstroom Finnish: Antovirta French: Courant de sortie German: Ausgangsstrom Hungarian: Kimenő áramerősség Italian: Corrente di uscita Polish: Prąd wyjściowy Protuguese: Corrente de saída Romanian: Curent de ieșire...
Page 25
Dutch: Gemiddelde actieve efficiëntie Finnish: Aktiivitilan keskimääräinen hyötysuhde French: Rendement moyen en mode actif German: Durchschnittliche Effizienz im Betrieb Hungarian: Aktív üzemmódban mért átlagos hatásfok Italian: Rendimento medio in modo attivo Polish: Średnia sprawność podczas pracy Protuguese: Eficiência média no modo ativo Romanian: Randament mediu în mod activ Spanish: Eficiencia media en activo Swedish: Genomsnittlig verkningsgrad i aktivt läge...
Page 26
Romanian: Puterea absorbită în regim fără sarcină Spanish: Consumo eléctrico en vacío Swedish: Elförbrukning vid noll-last Norwegian: Strømforbruk uten belastning FCC Notice (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 27
CANADA ENGLISH Industry Canada Statement (For Canada) [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Page 28
(3) Devices shall not be used on aircraft, except for the low-power indoor access points, indoor subordinate devices, low-power client devices, and very low-power devices operating in the 5925-6425 MHz band, that may be used on large aircraft as defined in the Canadian Aviation Regulations, while flying above 3,048 meters (10,000 feet). (4) Devices shall not be used on automobiles.
(3) Les dispositifs ne doivent pas être utilisés à bord des aéronefs, sauf pour les points d’accès intérieurs de faible puissance, les dispositifs subordonnés intérieurs, les dispositifs clients de faible puissance et les dispositifs de très faible puissance dans la bande 5 925-6 425 MHz, autorisés à bord des grands aéronefs, comme défini par le Règlement de l’aviation canadien, lors des vols au-dessus de 3 048 m (10 000 pieds).
Page 31
この機器を使用する前に、近くで移動体識別用の構内無線局及び特定小電力無線局並びにアマチュア無線局が運用 されていないことを確認して下さい。 万一、この機器から移動体識別用の構内無線局に対して有害な電波干渉の事例が発生した場合には、速やかに使用 周波数を変更するか又は電波の発射を停止した上、下記連絡先にご連絡頂き、混信回避のための処置等(例えば、 パーティションの設置など)についてご相談下さい。 その他、この機器から移動体識別用の特定小電力無線局あるいはアマチュア無線局に対して有害な電波干渉の事例 が発生した場合など何かお困りのことが起きたときは、次の連絡先へお問い合わせ下さい。 連絡先: LG Electronics Japan(株)カスタマーセンター 固定電話から 0120-407-722 携帯電話・PHSから 050-3188-3900 IP電話などからフリーダイヤル、ナビダイヤルがご利用いただけない場合は TEL:03-5675-7323 FAX:03-5675-7335 受付時間 09:00~18:00(年末年始および当社指定日を除く) この装置は、クラスB機器です。この装置は、住宅環境で使用することを目的としていますが、この装置がラジオやテレビ ジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 V C C I - B RF モジュール:Intel® AX211D2W 貴重な金属を再利用し、地球環境を守るために、不要になった電池は廃棄せず、充電式 電池リサイクル協力店へお持ち下さい。 最寄のリサイクル協力店へ詳細は、一般社団法人JBRCのホームページをご参照くだ さい。 ホームページ:http://www.jbrc.com...
Page 32
GREEN MARK (for Japan) 本製品は、日本工業規格(JIS C0950:2008)における「電気•電子機器の特定 の化学物質の含有表示方法」(通稱J-Moss)の規定する特定化学物質の含有 率が基準値以下に管理された製品あるため、J-Moss グリーンマークを表示して います。 特定の化学物質(鉛、水銀、カドミウム、六価クロム、PBB、PBDE)の含有に ついての情報は下記Webサイトをご覧下さい。 Webサイト: http://www.lg.com/jp/eco/eco-product#jMoss EPEAT “EPEAT registered where applicable/supported. EPEAT registration varies by country - see www.epeat.net for registration status by country. ” UKRAINE only Обмеження України на наявність небезпечних речовин...
Page 33
SAFETY REGULATION NOTICE Battery ENGLISH • Risk of fire or explosion if the battery is replaced by an incorrect type. • Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types).
Page 34
• Å etterlate et batteri i omgivelser med ekstremt høy temperatur som kan resultere i en eksplosjon eller lekkasje av brennbar væske eller gass. • Et batteri som er utsatt for ekstremt lavt lufttrykk kan resultere i en eksplosjon eller lekkasje av brennbar væske eller gass.
Page 35
• A eliminação de uma bateria no fogo ou num forno quente ou o esmagamento ou corte mecânico de uma bateria pode resultar numa explosão. • Deixar uma bateria num ambiente de temperatura extremamente alta pode resultar numa explosão ou na fuga de líquidos ou gases inflamáveis.
Page 36
Tűz- vagy robbanásveszély, ha az akkumulátort nem megfelelő típusúra cserélik. • Az akkumulátor cseréje nem megfelelő típusúra, amely védelmet jelenthet (például néhány lítium elemtípus • esetében). Az elemek tűzben vagy forró sütőben való megsemmisítése, vagy az elemek mechanikus összetörése vagy •...
Page 37
• Risque d’incendie ou d’explosion si la batterie est remplacée par un type incorrect. • Remplacement d’une batterie par un type incorrect qui peut faire échouer un dispositif de protection (par exemple, dans le cas de certains types de batteries au lithium). •...
Page 38
Uređaj možete odnijeti u trgovinu u kojoj ste kupili proizvod ili možete kontaktirati ured za zbrinjavanje otpada kod vaših mjesnih nadležnih tijela te od njih saznati više informacija o najbližem ovlaštenom WEEE sabirnom centru. Za najnovije informacije iz svoje države pogledajte internetske stranice www.lg.com/global/recycling ČESKY (Czech) Likvidace starého přístroje...
Page 39
U kunt uw apparaat meenemen naar de winkel waar u het product heeft gekocht, of u kunt contact opnemen met uw plaatselijke afvalverwerking instantie voor de gegevens van uw dichtstbijzijnde geautoriseerde WEEE- verzamelpunt. Voor de meest recente informatie voor uw land verwijzen wij u naar www.lg.com/global/recycling DEUTSCH (Germany)
Page 40
Rückgabemöglichkeiten in zumutbarer Entfernung anzubieten. Daher empfehlen wir Ihnen sich für weitere Informationen an Ihren Händler zu wenden. LG Electronic Deutschland GmbH ist ordnungsgemäß als Hersteller in Deutschland registriert. Damit trägt LG deutschlandweit zur Sammlung von Elektro- und Elektronik-Altgeräten bei, die Sie in kommunalen Getrenntsammelstellen abgeben.
Page 41
Du kan bringe apparatet enten til butikken der du kjøpte produktet, eller ta kontakt med den lokale myndighetens avfallskontor for informasjon om nærmeste autoriserte innsamlingspunkt for el-avfall (WEEE- avfall). For den mest oppdaterte informasjonen for ditt land, gå til www.lg.com/global/recycling. POLSKI (Poland) Utylizacja starego urządzenia...
Page 42
Vaš aparat možete da odnesete u radnju gde ste ga kupili ili da kontaktirate lokalnu vladinu kancelariju za otpad kako biste dobili informaciju o najbližoj autorizovanoj WEEE stanici za odlaganje ovog otpada. Za najnovije informacije za Vašu zemlju, molimo Vas da pogledate web stranicu www.lg.com/global/recycling. SLOVENČINA (Slovakia) Zneškodnenie starého spotrebiča...
Page 43
Svoj spotrebič môžete zaniesť do predajne, kde ste produkt zakúpili, alebo sa môžete obrátiť na oddelenie odpadov miestnej samosprávy a požiadať o informácie o najbližšom zbernom mieste odpadu z elektrických a elektronických zariadení (WEEE). Najnovšie informácie platné pre vašu krajinu nájdete na stránke www.lg.com/ global/recycling SLOVENŠČINA (Slovenia)
Page 44
ämnen som kan återvinnas för att spara jordens resurser. Du kan ta din gamla produkt till butiken där du köpte den eller kontakta din kommun för information om närmaste WEEE-uppsamlingsställe. För att få den senaste informationen för ditt land, gå till www.lg.com/ global/recycling РУССКИЙ...
Page 45
Сіз өзіңіздің құрылғыңызды өнімді сатып алған дүкенге апара аласыз немесе WEEE-дің ең жақын уәкілетті жинау орны туралы білу үшін жергілікті муниципалды қалдықтарды басқару кеңсесіне жүгіне аласыз. Сіздің еліңіз үшін ең соңғы ақпаратты www.lg.com/global/recycling сайтына қарауға болады. EESTI (Estonian) Vana seadme hävitamine Läbikriipsutatud ristiga prügikasti sümbol tähendab, et elektri- ja elektroonikaseadmete (WEEE) jäätmed tuleb...
Page 46
LG Take-back & Recycling Policy (For USA) LG Electronics offers a customized e-waste take-back & recycling service that meets local needs and requirements in the countries where e-waste regulations are in place, and also provides product take-back & recycling service voluntarily in some regions.
Page 47
To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact No. 08069379999, Toll Free No. 1800-315-9999 for details. All collection centre and pick up facilities are done by third parties with LG Electronics India Ltd. Merely as a facilitator. For more detailed information, please visit : http://www.lg.com/in.
Page 49
à saúde humana. Programa Coleta Inteligente A LG criou o Programa Coleta Inteligente, para facilitar e viabilizar o descarte ambientalmente adequado de produtos, pilhas e baterias. Através do Programa Coleta Inteligente, a LG disponibiliza pontos de coleta em localidades diversas, incluindo assistências técnicas autorizadas da LG Electronics.
Page 50
3 لمزيد من المعلومات التفصيلية حول التخلص من البطاريات القديمة ، يرجى الاتصال بمكتب خدمة التخلص من النفايات في عن طريق الدخول علي الرابط التاليLG مدينتك أو المتجر الذي اشتريت منه المنتج. كما يمكنك الاتصال بمركز اتصال ممثل دعم...
Page 51
Rätt hantering av dina gamla batterier/ackumulatorer medverkar till att förhindra negativa konsekvenser för miljön, och för djurs och människors hälsa. För mer detaljerad information om hanteringen av dina gamla batterier/ackumulatorer ber vi dig ta kontakt med myndigheterna där du bor, eller med affären där du köpt din apparat. (http://www.lg.com/global/ sustainability/environment/take-back-recycling/global-network-europe) NEDERLANDS Dit symbool kan samen met de chemische symbolen voor kwik (Hg), cadmium (Cd) en lood (Pb) worden gebruikt als de batterij of de accu meer dan 0,0005% kwik, 0,002% cadmium of 0,004% lood bevat.
Page 52
Når du bortskaffer dine gamle batterier/akkumulatorer på korrekt vis, hjælper du med til at forhindre mulige negative konsekvenser på miljøet samt på dyrs og menneskers sundhed. Ønsker du yderligere oplysninger om bortskaffelse af dine gamle batterier/akkumulatorer, skal du kontakte de offentlige myndigheder, genbrugspladsen eller butikken, hvor du købte produktet. (http://www.lg.com/global/ sustainability/environment/take-back-recycling/global-network-europe) ΕΛΛΗΝΙΚΑ...
Page 53
A eliminação correcta das baterias/acumuladores usadas ajuda a prevenir consequências negativas potenciais para o ambiente e para a saúde humana e animal. Para informações mais detalhadas sobre a eliminação das suas baterias/acumuladores, contacte por favor os serviços de reciclagem locais, ou o local onde adquiriu o produto. (http://www.lg.com/global/sustainability/ environment/take-back-recycling/global-network-europe) SLOVENČINA Tento symbol môže byť...
Page 54
Teie vanade patareide/akude nõuetekohane käitlemine aitab ära hoida võimalikke negatiivseid tagajärgi keskkonnale ja inimeste tervisele. Täpsema teabe saamiseks oma vanade patareide/akude käitlemise kohta põõrduge palun kohaliku omavalitsuse/jäätmekäitlusettevõtte poole või kauplusse, kust te antud toote ostsite. (http://www.lg.com/ global/sustainability/environment/take-back-recycling/global-network-europe) LATVIEŠU Šo simbolu var papildināt dzīvsudraba (Hg), kadmija (Cd) vai svina (Pb) ķīmisko elementu simboli, ja akumulators satur vairāk kā...
Page 55
Eliminarea corectă a vechilor dvs. baterii/acumulatoare va ajuta la prevenirea potenţialelor consecinţe negative asupra mediului înconjurător şi sănătăţii oamenilor. Pentru informaţii mai detaliate despre eliminarea vechilor dvs. baterii/acumulatoare, contactaţi biroul local, serviciul de eliminare a deşeurilor sau magazinul de la care aţi achiziţionat produsul. (http://www.lg.com/global/ sustainability/environment/take-back-recycling/global-network-europe) NORSK Dette symbolet kan være kombinert med de kjemiske tegnene for kvikksølv (Hg), kadmium (Cd) eller bly (Pb)
Page 56
Ispravnim odlaganjem starih baterija/akumulatora sprečavate potencijalne negativne efekte na okolinu, zdravlje životinja i ljudi. Dodatne informacije o odlaganju starih baterija/akumulatora zatražite od gradske uprave, komunalnog preduzeća ili prodavnice u kojoj ste kupili proizvod. (http://www.lg.com/global/sustainability/environment/take- back-recycling/global-network-europe) РУССКИЙ Данный символ может быть совмещен со значком химического элемента: ртути(Hg), кадмия(Cd) или...
Page 57
• La batteria è conforme al Regolamento (UE) 2023/1542 ESPAÑOL • La pila cumple con el Reglamento (UE) 2023/1542 CATALÀ • La bateria compleix el Reglament (UE) 2023/1542 PORTUGUÊS • A bateria está em conformidade com o Regulamento (EU) 2023/1542 NEDERLANDS •...
Page 58
To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact LG Service Helpline, or other independent service providers for advice.
Page 59
Per evitare danni al prodotto, e per la propria sicurezza, gli utenti non devono tentare di rimuovere la batteria, ma contattare il Servizio clienti di LG o altri fornitori di servizi indipendenti per ottenere consiglio.
Page 60
Στην περίπτωση που το προϊόν διαθέτει ενσωματωμένη μπαταρία που δε μπορεί να αφαιρεθεί από το χρήστη, η LG σας προτείνει να απευθυνθείτε σε επαγγελματία για την αφαίρεση της μπαταρίας, εάν πρόκειται να την αντικαταστήσετε ή να τη στείλετε για ανακύκλωση στο τέλος της ζωής της. Για την πρόληψη βλάβης στο προϊόν, και...
Page 61
Eliminarea bateriilor uzate și acumulatorilor uzați (DOAR în cazul produselor cu baterie încorporată) • În cazul în care bateria este încorporată în produs și nu poate fi îndepărtată de utilizatorul final, LG recomandă ca bateria să fie îndepărtată doar de către un personal calificat; bateria astfel îndepărtată trebuie înlocuită și reciclată...
Page 62
LG Service Helpline, eller en annan oberoende tjänsteleverantör för att få hjälp. För att ta ut batteriet måste produktens chassi avlägsnas, elkablarna och kontakterna frånkopplas, varefter battericellen varsamt tas ut. Vid behov av instruktioner från behöriga fackmän kring hur batteriet avlägsnas på...
Page 63
Nederīgo bateriju un akumulatoru izņemšana (TIKAI produktiem ar iebūvētu akumulatoru) • Ja šim produktam ir akumulators, kas iebūvēts produktā tā, ka gala lietotājs to nevar vienkārši izņemt, LG iesaka akumulatora izņemšanu nomaiņas vai pārstrādes nolūkos produkta dzīves cikla beigās uzticēt tikai kvalificētiem speciālistiem.
било да е за менување или за рециклирање по истекот на животниот век на производот. За да спречат оштетувања на производот и поради нивна сопствена безбедност, корисниците не треба да се обидуваат да ја отстрануваат батеријата и треба да ја контактираат линијата за помош при услуги на LG или други независни испорачувачи на услуги.
• If you connect to Bluetooth device and wireless LAN at the same time, the system may become slow. • In order to use Bluetooth 5.3, the device you want to connect to should support Blue tooth 5.3. Wireless LAN Intel®...
If you and LG are unable to resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
Page 67
Opt Out. . You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either: (i) sending an e-mail to...
Using Windows 11 Starting Windows 11 Screen Layout The taskbar in Windows 11 has been changed so you can use Windows quickly and easily. Widget: It displays weather and news in the form of widgets. Start Button: It can run apps installed on your PC or use user accounts, power menu, etc. Search: It can use apps, documents, and web search functions.
All apps: It shows all the apps installed on your PC. Apps pinned on the Start screen: It shows the apps pinned on the Start screen. Recommended: It displays the recommended apps. User Account: Displays the current user's information. You can use functions such as Change Account Settings, Lock or Sign out.
Select the Start button [ ] > [All apps]. Tip: Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. Select and run an app. To close the app, select the Close button [ ] at the top of the app screen.
Page 71
Tip: The basic Windows apps that are required may not be deleted. The desktop app can be deleted by pressing the Start button [ ] > [Settings] > [Apps] > [Installed apps]. Select the Start button [ ] and right-click the app you want to delete from the Start screen or [All apps] to select [Uninstall].
Page 72
Right-click the app you want to add and then click [Pin to Start] or [More] > [Pin to taskbar].
Page 73
The app is added to the Start Screen or taskbar. Toggling and Adding Apps/Desktops In Windows 11, you can toggle the running apps easily and quickly, and add desktops to use them like multiple PCs. Tip: For an app that does not allow multitasking, you may be switched to the desktop where the app was executed, or you may have an error message.
Page 74
Select [New desktop] to create [Desktop 2]. Tip: In the desktop preview, press the Close button [ ] to delete the desktop and move running apps to another desktop. Select an app in the preview or desktop.
The screen is toggled to the selected app or desktop. Using Shortcut Keys Use the shortcut keys to quickly toggle between apps and desktops. Shortcut Keys Description [Alt] + [Tab] Hold down the [Alt] key and press the [Tab] key to view the running apps in the pre view.
If you switch to a Microsoft account, your PC settings (background, user settings, etc.) may be changed to the previous settings. Select [ ] on the taskbar to run [Microsoft Store]. Select the app or use the search function on the store screen to install the desired app when the [Microsoft Store] screen appears.
(If no password is set, the screen will be released when you select the login.) Setting the PC Windows 11 supports various functions so that the user can change the PC setting easily and quickly. Using the Setting Menu Select the Start button [ ] >...
When the Settings screen appears, select and change the settings as needed. Using the Quick Settings Quick Settings allows users to change the PC settings quickly and easily. Select [Quick Settings] on the right side of the taskbar. Select the desired setting from [Quick Settings] and change.
Page 79
Tip: Select the [ ] icon to run the [Settings] menu. Windows Shutdown Option In Windows 11, you can use the Windows shutdown option by following these steps:...
Page 80
Select the Start button [ ] > [Power] and select the desired Windows shutdown option. Tip: Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. Tip: On the Desktop screen, press [Alt] + [F4] to use the Windows shutdown option. (Pressing [Alt] + [F4] on a running app may end the app.)
Using the PC Product Tour The actual product may differ in shape and color from the product images included in this LG Easy Guide. Front IR LED IR Camera Webcam Webcam Operation Status Lamp Built-in Microphone Keyboard Touchpad Power Button [...
Page 82
Left Right HDMI Port USB-C® Port (Can connect to a LAN adapter/Power Port) (1) USB 4.0 Gen 3x2/Thunderbolt™ (2) USB 3.2 Gen 2x1 Headphone Port (4-pole Ear Microphone Port) Built-in Speakers USB Port (USB 3.2 Gen 1x1) Security Keyhole (Kensington Security Slot) Tip: •...
When using ear microphone (or Bluetooth headset), audio input and output are directed to the connected device and the microphone and speaker on PC do not work. The 4-pole ear microphone port does not support external microphone. Battery Charge Connect the adapter to power and charge the product. Tip: The power cable and the adapter type may differ per model type and country and there is no difference in functionality.
Page 84
Caution: Do not leave a liquid container on the PC. • The system may be short-circuited and damaged. Use batteries certified and acknowledged by LG Electronics Inc. • Uncertified batteries may explode. Warning: Please use an adapter certified by LG Electronics Inc.
Page 85
• Do not twist the adapter plug. • When you connect the adapter, do not forcefully push the plug. The battery may explode due to excessive heat, causing fire. For a safe and efficient use of battery, follow the below directions. •...
• LG Notebook frequently checks the charge level of its battery based on usage conditions, and then calculates and correctly indicates the actual remaining level of the battery. • The battery is wearable goods and thus the life span may become shorter with use. The battery running time may also become shorter accordingly.
• Off: When the adapter is not connected If you try to turn on the system that has entered the Hibernate mode or been turned off after a low- battery alarm, the system will not be turned on but the lamp will blink three times. If this is the case, connect the adapter and charge the battery sufficiently before using it.
Page 88
Fn + F2 Adjusts screen brightness (brightness decreases in 11 levels). Fn + F3 Adjusts screen brightness (brightness increases in 11 levels). Fn + F4 Switches to using the Touchpad Mode • Each time you press the [Fn] + [F4] keys, the mode switches between Touchpad Off (touchpad disabled) and Touchpad On (touchpad enabled).
Page 89
Fn + L Switches to PC Cleaning Mode Fn + Space bar Run gram chat On-Device • It is not run in a model whose system memory is configured below 16 GB. Works as the [Pop-up Window] key. Fn + Fn + ◀...
• Key Shortcut Guide Keyboard Backlight You can use the Keyboard Backlight function to use the product in a dark environment. • Press the [Fn] + [F6] keys on the keyboard and use Keyboard Backlight. The status changes in the following order: KBD Backlight Off, KBD Backlight Low, and KBD Backlight High. Option: This only applies to the products that have the Keyboard Backlight function.
Select [PC Maintenance] > [Keyboard & Pen] to set the keyboard backlight. Adjusting Screen Brightness and Volume LG PC allows you to use the hot keys to easily adjust the screen brightness and volume. Tip: According to the model type, a button for volume control (mute, volume up/down, Dolby, etc.) may be available.
Page 92
Volume [Fn] + [F11], [F12] Press the [Fn] + [F11] to lower the volume and [Fn] + [F12] to in crease the volume. The volume adjustment bar in [Quick Settings] on the right side of the taskbar allows you to adjust the volume. Mute [Fn] + [F10] Whenever you press [Fn] + [F10], it operates as mute/unmute.
Set [Ear Protection] to [On] to activate the hearing protection feature. Tip: A warning message will be displayed if the volume is high while this feature is on. Using the Touchpad The built-in touchpad provides the same functionality as an external mouse. You can use the touchpad and USB mouse simultaneously.
Touchpad • Moves the cursor. Left button • Use to select or execute programs. Right button • Functions as the right button of a mouse in most cases. However, the usage may differ depending on programs. Tip: The scroll function is provided as a gesture. Please refer to the Touchpad Gesture section of this document. Precautions for Using the Touchpad •...
Click (Select) Press and release the left button swiftly with a finger. (Or tap the touchpad once.) Do this, for example, to select a menu or icon and to place the cursor to type on a word processor file. Double-click (Execute) Press the left button twice consecutively and release the button.
Page 96
Drag & Drop To drag, click and hold an icon, and move it to another location. To drop, release the dragged icon in the location you want. To move a file icon to another folder or to Recycle Bin, place the cursor (or the pointer) on the icon, press and hold the left button, and glide another finger on the touchpad until the icon reaches the aimed location.
Page 97
Select [Bluetooth & devices] > [Mouse] > [Additional mouse settings]. Check [Turn on ClickLock] and select [Settings]. Set the duration of ClickLock operation.
Press the left button of the touchpad and release it to change the button into the pressed state. Move on the touchpad to use the drag/scroll feature. Press the left mouse button to turn off the ClickLock. Touchpad Gesture The touchpad gesture feature allows you to use Windows programs more easily by utilizing multi-touch functions. Windows 11 Touchpad Gestures allow you to use the PC more easily.
Page 99
Setting Touchpad You can change the touchpad features or enable/disable the gesture feature. Select the Start button [ ] > [Settings]. Tip: Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. Select the [Bluetooth & devices] > [Touchpad]. Change the settings as needed on the [Touchpad] item.
Page 100
Use the cable/adapter that fits the USB-C® specifications and supports Alternate Mode. • The USB-C® cable/adapter for non-LG products may not be connected or cause a problem. Connect the PC and external display with a cable that fits the external display device.
Page 101
Press the [Fn] + [F5] (or [ ] + [P]) keys on the keyboard to change Display Mode. Caution: If you do not set Speaker as the default value after separating the external display connection cable, the system may not produce any sound. (If a program was running already, you must exit and restart the program to produce sound.) Connecting to Wireless Display The wireless display feature connects the PC screen and sound to a display (TV, projector, etc.).
Page 102
Select [Connect] under the [System] > [Display] > [Multiple displays] > [Connect to a wireless display] menu. If the device search screen appears, it will search for nearby wireless display devices.
Page 103
Select an available device and connect the device. Once the wireless display device is connected, it outputs the PC screen and its sound. Connecting an External USB-C® (Thunderbolt™) Device You can use the USB-C® port to connect the USB device. Thunderbolt™/USB 4.0 Gen 3x2 specifications supported USB 3.2 Gen 2x1 specifications supported Connecting a USB Device...
Page 104
You can connect to the USB-C® port an external display or a high-performance data device that support the Thunderbolt™ specifications. Depending on the specifications of the device connected to the USB-C® port, it acts as a USB or Thunderbolt™ device. Tip: The Thunderbolt™...
Page 105
Use the Thunderbolt™ cable to connect two notebook PCs. A while later, an icon of the connected computer appears on the desktops of the two notebook PCs. Double-click the connected computer icon to open the authentication screen. Input the user name and password to connect to the other PC. Tip: If there is no shared folder in the connected PC, nothing may appear on the screen.
Page 106
Using USB-C® (Thunderbolt™) Charging Function You can connect the USB-C® device to charge a notebook PC battery or an external device, and the operation mode is automatically selected depending the charge settings of the connected device. • To charge a notebook PC battery, the external device (USB PD Charger, notebook PC, etc.) should support USB Power Delivery 10 W (5 V / 2 A) or higher profile.
Page 107
If you connected a smartphone, you should select "Charge mobile phone" on the smartphone screen to charge the phone battery. Caution: If the power consumption of the notebook PC is larger than the power supply from the external device, the battery may be consumed gradually.
Select the Bluetooth to search for Bluetooth devices automatically. After selecting the device you want to connect, complete the Bluetooth connection as guided. Wired LAN LAN is the network environment that users can connect to by using a cable to connect to their internet providers or the company's network.
Page 109
Connect the LAN adapter to the USB-C® port on the PC. Tip: The recommended network cable for the optimal network environment is CAT5 or higher. The network (LAN) cable may be connected when the LAN adapter is used. Connect the wired LAN cable to the LAN port.
Page 110
Select the Start button [ ] > [Settings]. Tip: Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. Select [Edit] in [Network & Internet] > [Ethernet] > [IP assignment].
To use an automatic IP (DHCP), select [Automatic]. If you wish to use a static IP, set [Manual] > [IPv4] to [On] and enter the necessary item. Contact the network service provider or administrator to use a static IP. Select [Save] to complete the network setup. Click the Web Browser icon to check whether the internet is operating normally.
Using the Wireless LAN If an Access Point (wired or wireless router) is in the vicinity of the PC, the wireless LAN can easily be accessed. Select [Quick Settings] on the right side of the taskbar. Tip: The displayed icons may differ from the figures herein. Select Manage Wi-Fi Connections [ ] to search for near Access Point.
Page 113
Select the Access Point you want to connect to and press [Connect]. If a connection is established, [Connected] appears below the Access Point name. Click the Web Browser icon to check whether the internet is operating normally. Tip: When searching for a wireless LAN, multiple Access Points may be discovered depending on the location of use.
Using the Airplane mode You can use the Airplane mode to turn off wireless functions such as wireless network and Bluetooth. • Select [Airplane mode] from [Quick Settings] on the right side of the taskbar to turn on/off the Airplane mode. Tip: If you turn on the wireless network or Bluetooth while the Airplane mode is on, the wireless network or Bluetooth settings are maintained.
Page 115
The number of LAN ports can vary for each router model. Please refer to the manual provided by the router manufacturer for setup of the network and internet.
- Press the [Fn] + [F1] keys to start the app easily. Tip: The menus and functions displayed in this app may differ depending on the model and app version. You can re-install the app in LG Update & Renew. The figures herein are subject to change without prior notice.
Page 117
The user can easily change and use various PC functions according to his or her needs. Learn more > (on page 119) Customer Support Notifies you of the apps or convenient functions provided by LG. Apps You can run the apps provided by LG directly.
Page 118
Quick Setting: Allows you to set main PC functions easily. Items can be changed and up to 6 items can be added. Guide: Notifies you of the apps or convenient functions provided by LG. Shortcut: You can run the apps or websites provided by LG directly.
Page 119
When connecting an external display, you can set to display the menu that play can set the Display Mode on the PC screen. Applying Lively Theme You can set various themes provided by LG PC or select an operation method of Lively Theme according to the charging status. Sound...
Page 120
*Supported to the built-in microphone/speaker only. Function Description AI Microphone Optimization Cancels out the noise input to the microphone to deliver clear sound. AI Speaker Optimization Cancels the noise output from the speakers to deliver clear sound. User voice tracking It removes voices of other users in the surroundings and delivers the regis...
Page 121
Lock Fn Key Allows you to set the hot keys (F1 - F12) to operate even without pressing Shortcut Guide While pressing the Fn key or key, you can set to display the shortcut guide that can be combined with this key. Display NumLock Key Status Allows you to set the screen to display the status change when you press the NumLock key.
Page 122
Hot keys] menu to register the app quickly. • Designated Shortcut: The Fn key can be combined with shortcuts supported only by LG PC to use some functions easily, and the designated shortcuts may not be changed by the user.
Page 123
• A malfunction or fire may occur. LG Update & Renew LG Update & Renew maintains the system in the optimal state through updates. • Select the Start button [ ] > [All apps] and run [LG Update & Renew].
Page 124
Menus and supported functions may differ depending on the model. It may not work properly depending on user environment (security tools, etc.) and the network status. Use LG Update & Renew to keep your system current and optimized. The figures herein are subject to change without prior notice.
Page 125
• Select an item to update in the [Update] menu and click [Installation]. gram chat On-Device gram chat On-Device helps search information on the PC fast and precisely through the AI technology. • Select the Start button [ ] > [All apps] and run [gram chat On-Device]. - Press the [Fn] + [Space bar] keys to start the app easily.
Page 126
Search: Enter the content to search. Attach File: You can attach a file. Send Button: Press the Send Button to create a response. LG gram Link LG gram Link allows you to transfer files conveniently to nearby PCs and mobile devices.
Page 127
] > [All apps] and run [LG gram Link]. Tip: To use LG gram Link, the devices using the app must be connected to the same Wi-Fi network and the app must be running on the devices. The app may not work properly on some mobile devices and upgrading the operating system of a mobile device may prevent some features from working properly.
Page 128
Connect the PC and mobile device to the same Wi-Fi network. In the LG gram Link app of the mobile device, select [Register on my LG PC] and scan the QR code on the PC screen to register the mobile device.
Connect: Shares screens as well as the keyboard/mouse between your PC and a registered mobile device. Settings: Allows you to manage the LG gram Link app settings and registered mobile devices. Sending Files In the [Send] menu, drag and drop the files (photos, videos, and documents) that you want to the area marked with dotted lines.
Page 130
Select a device. - If no device appears on the screen, select [ - If still no device is discovered, refer to [Reconnecting to Bluetooth] below. Enter the PIN code displayed on the PC screen in the connected device. (If you are sending files to a registered device, you don’t need to enter the PIN code.) You only need to enter the PIN code once.
When you’re done transferring files, select [ Importing Files The Import File function is available only to the mobile devices registered on your PC. In the [Import] menu, select a registered mobile device. When the mobile device's album is displayed on the app, select the files or videos you want. Select [ ] to save the selected files in the PC.
Tip: The files saved in your PC can be found in [Settings] > [Download location]. Connecting to Devices In the [Connect] menu, select the menu for a desired function and connect to the device. – If you want to change the device to connect to, select [ ] and change the device.
Page 133
• Mirror Mobile device screen: The screen of the registered mobile device appears on the PC screen, and you can control the mobile device via the PC. (If you want to stop using the PC's keyboard and mouse on the mirrored mobile device screen, press [Esc].) •...
Page 134
Turn off the Bluetooth function of the PC and the mobile device, wait for 10 seconds, and turn it back on. Run the LG gram Link app and reconnect the PC. LG Glance by Mirametrix® LG Glance by Mirametrix® uses AI-based attention detection technology to improve PC productivity and enhance security. •...
Page 135
Tip: LG Glance by Mirametrix® basically operates with the power connected, and connecting an external monitor makes it possible to utilize various functions more efficiently. You can re-install the app in LG Update & Renew. The figures herein are subject to change without prior notice.
Page 136
Settings: Provides the settings menu and tutorial (help on how to use) of LG Glance by Mirametrix®. Tip:...
Page 137
Tour Home: Allows you to experience contents for Dolby Atmos. Product: Allows you to set the product that can activate Dolby Atmos effects. (It is set to the built-in speaker by default, and when connecting the headphone, it changes to the headphone.) Settings: Allows you to select various sound effects according to the situation.
Restoring the System Restoring the System If the system has an error, you can use Windows’ recovery function to recover or restore the system to its initial pre- purchase state. Caution: If you have deleted the restoration data in the protected area of the disk, or have arbitrarily installed another operating system, the restore function may not work.
Page 139
Select the options you want to proceed with the recovery. Keep My Files It removes the apps and their settings without loss of personal files.
Page 140
Select [Keep my files]. Select How to Reinstall Windows. Tip: If the PC is not connected to the Internet, the screen for selecting Windows installation method does not appear. [Cloud download] is a menu for downloading Windows from Microsoft Cloud Server and reinstalling it. The required time may vary depending on the Internet speed.
Page 141
Tip: If you select [Change Settings], you can change the current settings. Remove everythings Removes all items from the system and restores the system to its initial pre-purchase state. Caution: All data is lost during the initialization, so you must backup all critical data in advance. It may take about 5 hours or longer depending on the system conditions.
Page 142
Select [Remove everything]. Select How to Reinstall Windows. Tip: If the PC is not connected to the Internet, the screen for selecting Windows installation method does not appear. [Cloud download] is a menu for downloading Windows from Microsoft Cloud Server and reinstalling it. The required time may vary depending on the Internet speed.
Page 143
Tip: If you select [Change Settings], you can change the current settings.
Setup and Upgrade Installing the Driver You can use LG Update & Renew to install the deleted drivers or the latest drivers easily and quickly. Select the Start button [ ] > [All apps] and run [LG Update & Renew].
Page 145
Tip: To use the system setup (F2), booting device selection (F10), you need to restart the system (click [Restart] in the system power menu) and then immediately press the corresponding function key due to the fast booting speed. Caution: • Do not change the system setup unless necessary.
Page 146
In a few moments, the system setup screen appears. Keys Used in System Setup Keys Function Enter Selects the current item. To deselect the current item or to move to the previous screen. ▲, ▼, ◄, ► (Arrow keys) Moves the cursor up, down, left, and right. F5, F6 Increases or decreases the item value.
Setting the Supervisor Password The password prevents unauthorized people from accessing the PC. By default, no password is set for the machine. If an unauthorized person changes the password in the System Setup, you will be unable to access the system. Tip: With the Supervisor Password, you are authorized to set all items in the System Setup and to set [Password on boot].
The password should not exceed 20 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them. Enter the password once more and press the [Enter] key. To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key.
Execute the System Setup screen, go to [Security] > [Set User Password] using the arrow keys and press the [Enter] key. When the Password Setting screen appears, enter a password and press the [Enter] key. The password should not exceed 20 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them.
Page 150
Execute the System Setup screen, go to [Security] > [Password on boot] using the arrow keys and press the [Enter] key. Select [Enabled] and press the [Enter] key to complete the [Password on boot] setting. Setting the Storage Device Password The Storage Device Password is to set a password in the storage device separate from the Supervisor Password.
Page 151
Execute the System Setup screen, go to [Security] > [Storage Security Features] using the arrow keys and press the [Enter] key. Go to the desired device and press the [Enter] key. Press the [Enter] key in [Set Password]. When the Password Setting screen appears, enter a password and press the [Enter] key. The password should not exceed 32 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them.
Page 152
To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key. The PC will restart. Deleting/Changing the Boot Password You can delete or change the password only after entering the current password. The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice.
Page 153
Enter the current password in the [Enter Current Password] field. Press the [Enter] key in the [Create New Password] field. When a pop-up window appears, select [Yes] and press the [Enter] key. To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key.
Page 154
Deleting the Boot Password (Storage Device) Execute the System Setup screen, enter the password, and press the [Enter] key. When the System Setup screen appears, go to [Security] > [Storage Security Features] using the arrow keys and press the [Enter] key. Go to the desired device and press the [Enter] key.
Page 155
Press the [Enter] key in the [Create New Password] field. When a pop-up window appears, select [Yes] and press the [Enter] key. To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key.
When a pop-up window appears, select [Yes] and press the [Enter] key. The settings will be reset to the factory default. To save the changes in system setup, press [F10]. When a pop-up window appears, select [Yes] and press the [Enter] key.
Page 157
Changing the Boot Order Reboot the system and press [F2] multiple times. Go to the [Boot] menu using the arrow keys when the system setup screen appears. Go to [Boot Type Order] and press [F5] or [F6] to change the booting order. To save the changes in system setup, press [F10].
Page 158
The PC will restart. Selecting a Booting Device to Use Reboot the system and press [F10] multiple times. When the Select Boot Device screen appears, go to the desired device using the arrow keys and press the [Enter] key. Boots using the selected device. Setting Auto Scaling The Windows Auto Scaling feature for user's convenience may partially blur the screen or display some icons and texts larger.
Page 159
Select the Start button [ ] > [Settings]. Tip: Press the [ ] key or [Ctrl] + [Esc] on the keyboard to display the Start screen. Select [System] > [Display]. Changing the [Scale] item value changes the auto scaling settings. Tip: After changing the Auto Scaling settings, some apps must be shut down and restarted for the scaling and layout to take effect.
Page 160
Using Instant Booting Instant Booting allows the system to boot automatically when the notebook PC cover is opened, so that you can use the system without pressing the power button. Select the Start button [ ] > [All apps] and run [My gram]. Turn on [Instant Booting].
Page 161
Using USB-C® (Thunderbolt™) Charging Function You can connect the USB-C® device to charge a notebook PC battery or an external device, and the operation mode is automatically selected depending the charge settings of the connected device. • To charge a notebook PC battery, the external device (USB PD Charger, notebook PC, etc.) should support USB Power Delivery 10 W (5 V / 2 A) or higher profile.
Page 162
- Press the [Fn] + [F1] keys to start the app easily. Tip: The menus and functions displayed in this app may differ depending on the model and app version. You can re-install the app in LG Update & Renew.
Page 163
The user can easily change and use various PC functions according to his or her needs. Learn more > (on page 165) Customer Support Notifies you of the apps or convenient functions provided by LG. Apps You can run the apps provided by LG directly.
Page 164
Quick Setting: Allows you to set main PC functions easily. Items can be changed and up to 6 items can be added. Guide: Notifies you of the apps or convenient functions provided by LG. Shortcut: You can run the apps or websites provided by LG directly.
Page 165
When connecting an external display, you can set to display the menu that play can set the Display Mode on the PC screen. Applying Lively Theme You can set various themes provided by LG PC or select an operation method of Lively Theme according to the charging status. Sound...
Page 166
*Supported to the built-in microphone/speaker only. Function Description AI Microphone Optimization Cancels out the noise input to the microphone to deliver clear sound. AI Speaker Optimization Cancels the noise output from the speakers to deliver clear sound. User voice tracking It removes voices of other users in the surroundings and delivers the regis...
Page 167
Lock Fn Key Allows you to set the hot keys (F1 - F12) to operate even without pressing Shortcut Guide While pressing the Fn key or key, you can set to display the shortcut guide that can be combined with this key. Display NumLock Key Status Allows you to set the screen to display the status change when you press the NumLock key.
Page 168
Hot keys] menu to register the app quickly. • Designated Shortcut: The Fn key can be combined with shortcuts supported only by LG PC to use some functions easily, and the designated shortcuts may not be changed by the user.
Page 169
Tip: The PC Cleaning Mode is a function that locks the keyboard and touchpad to stop operating when cleaning the product while the power is turned on. Turn off PC Cleaning Mode: Press and hold the [Fn] + [L] keys on the keyboard until the bar displayed on the screen is filled.
Page 170
Select [Reset PC] in [System] > [Recovery] > [Reset this PC].
Page 171
Select the options you want to proceed with the recovery. Keep My Files It removes the apps and their settings without loss of personal files. Select [Keep my files]. Select How to Reinstall Windows. Tip: If the PC is not connected to the Internet, the screen for selecting Windows installation method does not appear.
Page 172
The required time may vary depending on the Internet speed. Check the current settings and select [Next] to perform the recovery according to the instructions. Tip: If you select [Change Settings], you can change the current settings. Remove everythings Removes all items from the system and restores the system to its initial pre-purchase state.
Page 173
Caution: All data is lost during the initialization, so you must backup all critical data in advance. It may take about 5 hours or longer depending on the system conditions. Select [Remove everything]. Select How to Reinstall Windows. Tip: If the PC is not connected to the Internet, the screen for selecting Windows installation method does not appear.
Page 174
Check the current settings and select [Next] to perform the recovery according to the instructions. Tip: If you select [Change Settings], you can change the current settings. Setting the Boot Password This process is to set a password so that other people cannot use the computer or change the settings. The user can set a password while booting the system or setting up the system.
Page 175
Caution: Without the registered password, access to the system will be denied. Write down and keep the password in a safe place. Setting the Supervisor Password The password prevents unauthorized people from accessing the PC. By default, no password is set for the machine. If an unauthorized person changes the password in the System Setup, you will be unable to access the system.
Page 176
When the Password Setting screen appears, enter a password and press the [Enter] key. The password should not exceed 20 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them. Enter the password once more and press the [Enter] key.
Page 177
Execute the System Setup screen, go to [Security] > [Set User Password] using the arrow keys and press the [Enter] key. When the Password Setting screen appears, enter a password and press the [Enter] key. The password should not exceed 20 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them.
Page 178
Execute the System Setup screen, go to [Security] > [Password on boot] using the arrow keys and press the [Enter] key. Select [Enabled] and press the [Enter] key to complete the [Password on boot] setting. Setting the Storage Device Password The Storage Device Password is to set a password in the storage device separate from the Supervisor Password.
Page 179
Execute the System Setup screen, go to [Security] > [Storage Security Features] using the arrow keys and press the [Enter] key. Go to the desired device and press the [Enter] key. Press the [Enter] key in [Set Password]. When the Password Setting screen appears, enter a password and press the [Enter] key. The password should not exceed 32 characters and should consist of English letters (A - Z), numbers (0 - 9), and special characters or a combination of them.
Page 180
The PC will restart. Installing the Driver You can use LG Update & Renew to install the deleted drivers or the latest drivers easily and quickly. Select the Start button [ ] > [All apps] and run [LG Update & Renew].
Page 181
Setting Auto Scaling The Windows Auto Scaling feature for user's convenience may partially blur the screen or display some icons and texts larger. Refer to the following information to change the DPI scaling to suit your needs. Select the Start button [ ] >...
Page 182
Tip: After changing the Auto Scaling settings, some apps must be shut down and restarted for the scaling and layout to take effect.
Need help?
Do you have a question about the 14Z90T Series and is the answer not in the manual?
Questions and answers