Preparation Of Fruit And Vegetables For Juice Extractor; Speed Selector Table - Breville BJE520 Instructions And Recipes Manual

operating your Breville ikon™ froojie™ juice fountain
continued
the lCd display will illuminate continuously for 3
minutes before going into a sleep mode, where it
will switch off automatically to conserve power.
the screen will come back on after activating
the 'on/off' switch, the speed control dial, or the
safety locking arm.
When the safety locking arm is not locked into
place on top of the juicer cover, the lCd display
will illuminate and flash with an "l", indicating
that the safety locking arm should be locked
into place.
When the safety locking arm is locked into
place on top of the juicer cover, the lCd display
will illuminate and display the selected speed
setting. the speed can be changed by adjusting
the variable speed control dial. for a quick
juicing speed reference, use the speed guide
displayed on the lCd screen, the speed selector
table located on the pulp container, or refer to
the speed selector table on page 13.
Hard fruits and vegetables will put excess strain
onto the motor if a low speed is selected. please
refer to the speed selector table to determine
the correct speed for the fruits and vegetables
being juiced
prepArAtIoN of fruIt ANd vegetABles
for juICe extrACtor

speed selector table

fruIt / vegetABles
Apples
Apricots (stone removed)
Beetroot (cleaned, trimmed)
Blueberries
Broccoli
Brussel Sprouts (trimmed)
Cabbage
Carrots (cleaned)
Cauliflower
Celery
Cucumber (peeled)
Cucumber - soft skinned
Fennel
Note
Grapes (seedless)
Kiwi fruit (peeled)
Mangoes (peeled, stone removed)
Melons (peeled)
Nectarines (stone removed)
Oranges (peeled)
Peaches (stone removed
Pears - hard (stalks removed)
Pears - soft (stalks removed)
Pineapple (peeled)
Plums (stone removed)
Raspberries
Tomatoes
Watermelon
®
suggested
speed
5
2
5
1
4
5
4
5
4
5
2
4
5
1
2
2
1
2
3
2
5
2
5
2
1
1
1
13